STD Tuning Engine OM606A EDC 7.5mm, injector nozzles

OM606A EDC 7.5mm, injector nozzles

OM606A EDC 7.5mm, injector nozzles

 
  • 0 Vote(s) - 0 Average
 
TBMY
Naturally-aspirated

13
04-12-2019, 07:12 AM #1
Hi Experts!

I am going to exchange nozzles from standard ones (Bosch DN0SD310), to Monark ones. There are several nozzle options out there...

I have approx 275HP (1.3 Bar). More important with torque than high HP if there is a difference...

Some nozzles...:
DN0SD261 
vs 
DN0SD265 
vs
DN0SD310
vs
DN0SD314
vs
DN0SD315
vs
DN12SD290
vs
?

Any expererience out there?

All info appreciated!!  Big Grin
This post was last modified: 04-12-2019, 07:13 AM by TBMY.
TBMY
04-12-2019, 07:12 AM #1

Hi Experts!

I am going to exchange nozzles from standard ones (Bosch DN0SD310), to Monark ones. There are several nozzle options out there...

I have approx 275HP (1.3 Bar). More important with torque than high HP if there is a difference...

Some nozzles...:
DN0SD261 
vs 
DN0SD265 
vs
DN0SD310
vs
DN0SD314
vs
DN0SD315
vs
DN12SD290
vs
?

Any expererience out there?

All info appreciated!!  Big Grin

firen456
TA 0301

73
04-14-2019, 04:29 AM #2
I'd try the 265 nozzles. From the named nozzles they performed the best. 310 and everything up makes the engine nail more.
firen456
04-14-2019, 04:29 AM #2

I'd try the 265 nozzles. From the named nozzles they performed the best. 310 and everything up makes the engine nail more.

TBMY
Naturally-aspirated

13
04-14-2019, 12:08 PM #3
Thanks! Much appreciated!! :-D

Good source for Monark in Europe?
TBMY
04-14-2019, 12:08 PM #3

Thanks! Much appreciated!! :-D

Good source for Monark in Europe?

firen456
TA 0301

73
04-18-2019, 01:50 PM #4
I use Bosch nozzles from motorintegrator. Never had Problems with them.
firen456
04-18-2019, 01:50 PM #4

I use Bosch nozzles from motorintegrator. Never had Problems with them.

TBMY
Naturally-aspirated

13
04-19-2019, 12:31 PM #5
(04-18-2019, 01:50 PM)firen456 I use Bosch nozzles from motorintegrator. Never had Problems with them.

Thanks, good to know, which motor and nozzle?  Smile
TBMY
04-19-2019, 12:31 PM #5

(04-18-2019, 01:50 PM)firen456 I use Bosch nozzles from motorintegrator. Never had Problems with them.

Thanks, good to know, which motor and nozzle?  Smile

 
  • 0 Vote(s) - 0 Average
Users browsing this thread:
 2 Guest(s)
Users browsing this thread:
 2 Guest(s)