+- STD (https://www.superturbodiesel.com/std)
+-- Forum: Tuning (https://www.superturbodiesel.com/std/forumdisplay.php?fid=6)
+--- Forum: Engine (https://www.superturbodiesel.com/std/forumdisplay.php?fid=7)
+--- Thread: OM606A EDC 7.5mm, injector nozzles (/showthread.php?tid=8223)
OM606A EDC 7.5mm, injector nozzles - TBMY - 04-12-2019
Hi Experts!
I am going to exchange nozzles from standard ones (Bosch DN0SD310), to Monark ones. There are several nozzle options out there...
I have approx 275HP (1.3 Bar). More important with torque than high HP if there is a difference...
Some nozzles...:
DN0SD261
vs
DN0SD265
vs
DN0SD310
vs
DN0SD314
vs
DN0SD315
vs
DN12SD290
vs
?
Any expererience out there?
All info appreciated!!
RE: OM606A EDC 7.5mm, injector nozzles - firen456 - 04-14-2019
I'd try the 265 nozzles. From the named nozzles they performed the best. 310 and everything up makes the engine nail more.
RE: OM606A EDC 7.5mm, injector nozzles - TBMY - 04-14-2019
Thanks! Much appreciated!! :-D
Good source for Monark in Europe?
RE: OM606A EDC 7.5mm, injector nozzles - firen456 - 04-18-2019
I use Bosch nozzles from motorintegrator. Never had Problems with them.
RE: OM606A EDC 7.5mm, injector nozzles - TBMY - 04-19-2019
(04-18-2019, 01:50 PM)firen456 I use Bosch nozzles from motorintegrator. Never had Problems with them.
Thanks, good to know, which motor and nozzle?
