83 240d, om603 7.5mm swap
83 240d, om603 7.5mm swap
04-04-2019, 12:35 PM
#2
(03-14-2019, 01:08 PM)Sltlytwkd I impulse bought my 240d sight unseen after a couple too many beers last summer. I quickly realized how much of a slug these cars are! I then bought a 603 with 722.3 trans, radiator, and driveshaft off craigslist for the swap.
I finally got the engine, trans, and radiator mounted and running. I recently picked up a diesel meken 7.5mm pump and have that in the car as well. My current problem is that I need longer banjo bolts for the fuel inlet and return. Where can I get these longer banjos? I found some on Ebay but the return needs to be restricted. Should I just run an external regulator with a normal banjo instead?
an external regulator is what i would do. you doing an electric pump too?
85 300d om603, 717, he 341, sch40 stainless manifold with prioritized 50mm external W/G (2"open dump), intercooled, intake manifold, full 3.5 stainless exhaust.
need to figure out a different trans cause its already pissed with only 5.5mm elements... then diff and suspension. but for now its daily as described above.
(03-14-2019, 01:08 PM)Sltlytwkd I impulse bought my 240d sight unseen after a couple too many beers last summer. I quickly realized how much of a slug these cars are! I then bought a 603 with 722.3 trans, radiator, and driveshaft off craigslist for the swap.
I finally got the engine, trans, and radiator mounted and running. I recently picked up a diesel meken 7.5mm pump and have that in the car as well. My current problem is that I need longer banjo bolts for the fuel inlet and return. Where can I get these longer banjos? I found some on Ebay but the return needs to be restricted. Should I just run an external regulator with a normal banjo instead?
an external regulator is what i would do. you doing an electric pump too?
85 300d om603, 717, he 341, sch40 stainless manifold with prioritized 50mm external W/G (2"open dump), intercooled, intake manifold, full 3.5 stainless exhaust.
need to figure out a different trans cause its already pissed with only 5.5mm elements... then diff and suspension. but for now its daily as described above.
Messages In This Thread
83 240d, om603 7.5mm swap - by Sltlytwkd - 03-14-2019, 01:08 PM
RE: 83 240d, om603 7.5mm swap - by g wizz - 04-04-2019, 12:35 PM
RE: 83 240d, om603 7.5mm swap - by Sltlytwkd - 04-07-2019, 08:05 AM
RE: 83 240d, om603 7.5mm swap - by g wizz - 04-07-2019, 11:49 AM
RE: 83 240d, om603 7.5mm swap - by Vict0r - 04-07-2019, 02:43 PM
RE: 83 240d, om603 7.5mm swap - by Sltlytwkd - 04-07-2019, 04:09 PM
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Users browsing this thread:
1 Guest(s)
1 Guest(s)