OM 606 head porting
OM 606 head porting
01-14-2019, 02:14 AM
#5
(01-14-2019, 01:40 AM)firen456 Went both sides with CDI valves. I Used the 7mm cdi valve guides. Seats in the head were cut bigger and seats on the valves were regrinded. The valves are 1,5mm shorter if i remeber it right... Uses Lashcaps to compensate that.
So you used the original seats and cut them bigger? And used the inline 6 cylinder CDI valves? Were did you get the lash caps from?
Thanks Zeeman
(01-14-2019, 01:40 AM)firen456 Went both sides with CDI valves. I Used the 7mm cdi valve guides. Seats in the head were cut bigger and seats on the valves were regrinded. The valves are 1,5mm shorter if i remeber it right... Uses Lashcaps to compensate that.
So you used the original seats and cut them bigger? And used the inline 6 cylinder CDI valves? Were did you get the lash caps from?
Thanks Zeeman
Messages In This Thread
OM 606 head porting - by zeeman - 01-13-2019, 12:03 PM
RE: OM 606 head porting - by firen456 - 01-13-2019, 12:38 PM
RE: OM 606 head porting - by zeeman - 01-13-2019, 09:00 PM
RE: OM 606 head porting - by zeeman - 01-14-2019, 10:36 PM
RE: OM 606 head porting - by firen456 - 01-14-2019, 01:40 AM
RE: OM 606 head porting - by zeeman - 01-14-2019, 02:14 AM
RE: OM 606 head porting - by firen456 - 01-14-2019, 07:41 AM
RE: OM 606 head porting - by zeeman - 01-14-2019, 12:03 PM
RE: OM 606 head porting - by zeeman - 01-14-2019, 10:33 PM
RE: OM 606 head porting - by JoeB - 01-14-2019, 11:09 AM
RE: OM 606 head porting - by firen456 - 01-14-2019, 01:21 PM
RE: OM 606 head porting - by firen456 - 01-15-2019, 06:44 AM
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Users browsing this thread:
2 Guest(s)
2 Guest(s)