OM 606 head porting

STD Tuning Engine OM 606 head porting

OM 606 head porting

View a Printable Version

0 Vote(s) - 0 Average

firen456

TA 0301

73

01-14-2019, 01:40 AM #4

Went both sides with CDI valves. I Used the 7mm cdi valve guides. Seats in the head were cut bigger and seats on the valves were regrinded. The valves are 1,5mm shorter if i remeber it right... Uses Lashcaps to compensate that.

firen456

01-14-2019, 01:40 AM #4

View a Printable Version

0 Vote(s) - 0 Average

Messages In This Thread

OM 606 head porting - by zeeman - 01-13-2019, 12:03 PM

RE: OM 606 head porting - by firen456 - 01-13-2019, 12:38 PM

RE: OM 606 head porting - by zeeman - 01-13-2019, 09:00 PM

RE: OM 606 head porting - by zeeman - 01-14-2019, 10:36 PM

RE: OM 606 head porting - by firen456 - 01-14-2019, 01:40 AM

RE: OM 606 head porting - by zeeman - 01-14-2019, 02:14 AM

RE: OM 606 head porting - by firen456 - 01-14-2019, 07:41 AM

RE: OM 606 head porting - by zeeman - 01-14-2019, 12:03 PM

RE: OM 606 head porting - by zeeman - 01-14-2019, 10:33 PM

RE: OM 606 head porting - by JoeB - 01-14-2019, 11:09 AM

RE: OM 606 head porting - by firen456 - 01-14-2019, 01:21 PM

RE: OM 606 head porting - by firen456 - 01-15-2019, 06:44 AM

Users browsing this thread:
1 Guest(s)