STD Other Projects OM606 Daimler slow project

OM606 Daimler slow project

OM606 Daimler slow project

 
  • 0 Vote(s) - 0 Average
 
Pages (2): 1 2 Next
Fishman
GTA2056V

92
10-12-2016, 12:05 PM #1
This week i bought 2 cars, a E300TD and a Daimler Sovereign (Jag XJ6)
[Image: 20161010_115607_zpsylvawgpp.jpg]
[Image: 20161012_133102_zpsl0clq0am.jpg]

The Daimler is 99.9% rust free, but the engine runs bad.(most likely rotor or dirty carbs).
The plan is to drive te MB for the winter and than pull the engine out en put it in te Damler.
I want to use an auto gearbox with Ole controller.
For the engine i'm looking for about 400 hp. It's gonna be a daily driver.
I'm thinking of a Holset HX40 and a Eaton M90/112 supercharger.

This thread is so i can ask some questions abou the build. Here the first ones:

I need an OM648 sump and pump. Can i use the OM606 Dipstick?
Same question for the gearbox: can i use the w5a330 dipstick, gearselector en oilcooler on a w5a580/900/1000?
This post was last modified: 10-12-2016, 12:06 PM by Fishman.
Fishman
10-12-2016, 12:05 PM #1

This week i bought 2 cars, a E300TD and a Daimler Sovereign (Jag XJ6)
[Image: 20161010_115607_zpsylvawgpp.jpg]
[Image: 20161012_133102_zpsl0clq0am.jpg]

The Daimler is 99.9% rust free, but the engine runs bad.(most likely rotor or dirty carbs).
The plan is to drive te MB for the winter and than pull the engine out en put it in te Damler.
I want to use an auto gearbox with Ole controller.
For the engine i'm looking for about 400 hp. It's gonna be a daily driver.
I'm thinking of a Holset HX40 and a Eaton M90/112 supercharger.

This thread is so i can ask some questions abou the build. Here the first ones:

I need an OM648 sump and pump. Can i use the OM606 Dipstick?
Same question for the gearbox: can i use the w5a330 dipstick, gearselector en oilcooler on a w5a580/900/1000?

Hario'
C300TD Wagon (W202)

894
10-13-2016, 01:39 PM #2
Very good idea.




Installed:

OM606/722.6, big IC, W220 brakes.
Planned:
DIY manifold, compound, 722.6 controller, built IP.
[i]Less rust.. 
[/i]
Hario'
10-13-2016, 01:39 PM #2

Very good idea.





Installed:

OM606/722.6, big IC, W220 brakes.
Planned:
DIY manifold, compound, 722.6 controller, built IP.
[i]Less rust.. 
[/i]

awsrock
300SDL / HX30 / 90cc

179
10-14-2016, 05:36 AM #3
Awesome, I also hope to convert a Jag one day, but possibly an XJS. Will be following to see how it goes!
awsrock
10-14-2016, 05:36 AM #3

Awesome, I also hope to convert a Jag one day, but possibly an XJS. Will be following to see how it goes!

Fishman
GTA2056V

92
10-14-2016, 08:08 AM #4
Xjs is real nice indeed. I wanted a car over 40 years old, so i don't have to pay roadtax.
Fishman
10-14-2016, 08:08 AM #4

Xjs is real nice indeed. I wanted a car over 40 years old, so i don't have to pay roadtax.

Evgeniy1987
GT2256V

139
10-14-2016, 10:17 AM #5
(10-14-2016, 08:08 AM)Fishman Xjs is real nice indeed. I wanted a car over 40 years old, so i don't have to pay roadtax.

Welcome to the club Tongue Tongue
Evgeniy1987
10-14-2016, 10:17 AM #5

(10-14-2016, 08:08 AM)Fishman Xjs is real nice indeed. I wanted a car over 40 years old, so i don't have to pay roadtax.

Welcome to the club Tongue Tongue

Hario'
C300TD Wagon (W202)

894
10-14-2016, 01:28 PM #6
(10-14-2016, 10:17 AM)Evgeniy1987
(10-14-2016, 08:08 AM)Fishman Xjs is real nice indeed. I wanted a car over 40 years old, so i don't have to pay roadtax.

Welcome to the club Tongue Tongue

In England they restarted the tax free after 25 years thing, so it was pre1972 was tax free, but now it's whenever a vehicle becomes 25 years old, so now its 1974 year manufacture or something.

The 202 has only got 25 years to wait..




Installed:

OM606/722.6, big IC, W220 brakes.
Planned:
DIY manifold, compound, 722.6 controller, built IP.
[i]Less rust.. 
[/i]
Hario'
10-14-2016, 01:28 PM #6

(10-14-2016, 10:17 AM)Evgeniy1987
(10-14-2016, 08:08 AM)Fishman Xjs is real nice indeed. I wanted a car over 40 years old, so i don't have to pay roadtax.

Welcome to the club Tongue Tongue

In England they restarted the tax free after 25 years thing, so it was pre1972 was tax free, but now it's whenever a vehicle becomes 25 years old, so now its 1974 year manufacture or something.

The 202 has only got 25 years to wait..





Installed:

OM606/722.6, big IC, W220 brakes.
Planned:
DIY manifold, compound, 722.6 controller, built IP.
[i]Less rust.. 
[/i]

Fishman
GTA2056V

92
10-14-2016, 01:31 PM #7
Overhere it was 25 yrs also. They have changed it to 40 yrs. I had a tax free Audi 100 diesel from 1986. Had to put in a gas engine to avoid diesel tax wich would be 140 eurp/month. So fitted a 290 hp S6 engine. But diesel is more my cop of tea.
Fishman
10-14-2016, 01:31 PM #7

Overhere it was 25 yrs also. They have changed it to 40 yrs. I had a tax free Audi 100 diesel from 1986. Had to put in a gas engine to avoid diesel tax wich would be 140 eurp/month. So fitted a 290 hp S6 engine. But diesel is more my cop of tea.

Hario'
C300TD Wagon (W202)

894
10-19-2016, 11:10 AM #8
(10-14-2016, 01:31 PM)Fishman Overhere it was 25 yrs also. They have changed it to 40 yrs. I had a tax free Audi 100 diesel from 1986. Had to put in a gas  engine to avoid diesel tax wich would be 140 eurp/month. So fitted a 290 hp S6 engine. But diesel is more my cop of tea.

wtf.

Extra high taxes on old diesels then?




Installed:

OM606/722.6, big IC, W220 brakes.
Planned:
DIY manifold, compound, 722.6 controller, built IP.
[i]Less rust.. 
[/i]
Hario'
10-19-2016, 11:10 AM #8

(10-14-2016, 01:31 PM)Fishman Overhere it was 25 yrs also. They have changed it to 40 yrs. I had a tax free Audi 100 diesel from 1986. Had to put in a gas  engine to avoid diesel tax wich would be 140 eurp/month. So fitted a 290 hp S6 engine. But diesel is more my cop of tea.

wtf.

Extra high taxes on old diesels then?





Installed:

OM606/722.6, big IC, W220 brakes.
Planned:
DIY manifold, compound, 722.6 controller, built IP.
[i]Less rust.. 
[/i]

Evgeniy1987
GT2256V

139
10-19-2016, 01:37 PM #9
(10-19-2016, 11:10 AM)Hario
(10-14-2016, 01:31 PM)Fishman Overhere it was 25 yrs also. They have changed it to 40 yrs. I had a tax free Audi 100 diesel from 1986. Had to put in a gas  engine to avoid diesel tax wich would be 140 eurp/month. So fitted a 290 hp S6 engine. But diesel is more my cop of tea.

wtf.

Extra high taxes on old diesels then?

No, just high taxes over Diesels in general... For my Scirocco, I pay 77 Euro a month, because it is 980 kg. In the Netherlands, Taxes are based on weight and fuel type.

After 40 years old, the car becomes tax free...
Evgeniy1987
10-19-2016, 01:37 PM #9

(10-19-2016, 11:10 AM)Hario
(10-14-2016, 01:31 PM)Fishman Overhere it was 25 yrs also. They have changed it to 40 yrs. I had a tax free Audi 100 diesel from 1986. Had to put in a gas  engine to avoid diesel tax wich would be 140 eurp/month. So fitted a 290 hp S6 engine. But diesel is more my cop of tea.

wtf.

Extra high taxes on old diesels then?

No, just high taxes over Diesels in general... For my Scirocco, I pay 77 Euro a month, because it is 980 kg. In the Netherlands, Taxes are based on weight and fuel type.

After 40 years old, the car becomes tax free...

CRD4x4
CompoundSuperTurboDiesel4x4!

399
10-20-2016, 06:26 AM #10
I love the project! That Jag has the sexiest body lines & I've looked for years for one without rust to put a 606 into, without success. Is that a '72? Did they ever come with a manual trans?
CRD4x4
10-20-2016, 06:26 AM #10

I love the project! That Jag has the sexiest body lines & I've looked for years for one without rust to put a 606 into, without success. Is that a '72? Did they ever come with a manual trans?

Fishman
GTA2056V

92
10-20-2016, 06:27 AM #11
Its a 1976 Daimler automatic.
Fishman
10-20-2016, 06:27 AM #11

Its a 1976 Daimler automatic.

CRD4x4
CompoundSuperTurboDiesel4x4!

399
10-21-2016, 06:43 AM #12
I was judging the year by the bumper design which was my mistake. By '76 your car would've had ugly big "federal" bumpers in the USA.
Either way, awesome car & good luck with the project!
CRD4x4
10-21-2016, 06:43 AM #12

I was judging the year by the bumper design which was my mistake. By '76 your car would've had ugly big "federal" bumpers in the USA.
Either way, awesome car & good luck with the project!

Fishman
GTA2056V

92
11-22-2016, 04:25 AM #13
Been collecting parts. So far i got a nice Holset HX40.
Just picked up this pump:
[Image: 20161122_101822_zpspab8fq39.jpg]
It's missing the feedpump. Will the feedpump from the EDC pump fit?
Fishman
11-22-2016, 04:25 AM #13

Been collecting parts. So far i got a nice Holset HX40.
Just picked up this pump:
[Image: 20161122_101822_zpspab8fq39.jpg]
It's missing the feedpump. Will the feedpump from the EDC pump fit?

Hario'
C300TD Wagon (W202)

894
11-22-2016, 04:31 AM #14
(11-22-2016, 04:25 AM)Fishman Been collecting parts. So far i got a nice Holset HX40.
Just picked up this pump:
[Image: 20161122_101822_zpspab8fq39.jpg]
It's missing the feedpump. Will the feedpump from the EDC pump fit?

Yes it will. Or maybe use the stock electric fuel feed system? Maybe with a newer pump though




Installed:

OM606/722.6, big IC, W220 brakes.
Planned:
DIY manifold, compound, 722.6 controller, built IP.
[i]Less rust.. 
[/i]
Hario'
11-22-2016, 04:31 AM #14

(11-22-2016, 04:25 AM)Fishman Been collecting parts. So far i got a nice Holset HX40.
Just picked up this pump:
[Image: 20161122_101822_zpspab8fq39.jpg]
It's missing the feedpump. Will the feedpump from the EDC pump fit?

Yes it will. Or maybe use the stock electric fuel feed system? Maybe with a newer pump though





Installed:

OM606/722.6, big IC, W220 brakes.
Planned:
DIY manifold, compound, 722.6 controller, built IP.
[i]Less rust.. 
[/i]

maxypriest
Holset

287
11-23-2016, 03:48 PM #15
That is a manual transmission pump with ara. Nice.

W124 om606 HX40 finished and it's a beauty 450bhp/456ft-lbs
maxypriest
11-23-2016, 03:48 PM #15

That is a manual transmission pump with ara. Nice.


W124 om606 HX40 finished and it's a beauty 450bhp/456ft-lbs

Fishman
GTA2056V

92
11-23-2016, 03:52 PM #16
Ara? Whats that?
Fishman
11-23-2016, 03:52 PM #16

Ara? Whats that?

uli124125
TA 0301

53
11-23-2016, 04:49 PM #17
anti ruckel aufschaltung
it is the lower magnet
this makes that the pump gives less fuel when the car starts to dance bonanza Wink
uli124125
11-23-2016, 04:49 PM #17

anti ruckel aufschaltung
it is the lower magnet
this makes that the pump gives less fuel when the car starts to dance bonanza Wink

Fishman
GTA2056V

92
12-04-2016, 03:39 PM #18
Been driving my donor 300TD for a week now. Thought she was a little slow. Found a leaking vacuum valve. Now she pulls like a fright train. I now realy like the OM606.....
Fishman
12-04-2016, 03:39 PM #18

Been driving my donor 300TD for a week now. Thought she was a little slow. Found a leaking vacuum valve. Now she pulls like a fright train. I now realy like the OM606.....

maxypriest
Holset

287
12-05-2016, 06:20 AM #19
When they are running well those W210 3.0TD's are absolutely superb.

W124 om606 HX40 finished and it's a beauty 450bhp/456ft-lbs
maxypriest
12-05-2016, 06:20 AM #19

When they are running well those W210 3.0TD's are absolutely superb.


W124 om606 HX40 finished and it's a beauty 450bhp/456ft-lbs

Fishman
GTA2056V

92
12-05-2016, 10:57 AM #20
Yesterday i bought a 722.634 gearbox from a 270 CDI with only 100.000 km's. Also sent a 603 pump to Dieselmeken.
Fishman
12-05-2016, 10:57 AM #20

Yesterday i bought a 722.634 gearbox from a 270 CDI with only 100.000 km's. Also sent a 603 pump to Dieselmeken.

Fishman
GTA2056V

92
01-14-2017, 09:01 AM #21
Just did the 3/4 flare mod on the transmission. Wasn't that hard of a job. I got a little scared when i found a couple of check balls and a tiny filter screen on the workbench Big Grin But thanks to my friend google, everything is back in place.

[Image: 20170114_125403_zpspfum95ly.jpg]
Valve body

[Image: 20170114_133530_zps0qeynx5j.jpg]

[Image: 20170114_141506_zpssph9hmq4.jpg]
Drilled this hole to 4mm.

More good news, yesterday i bought a power lock diff from a 1987 Jaguar XJR V12. It als has a better gearratio than the original (closer to the w210).
Fishman
01-14-2017, 09:01 AM #21

Just did the 3/4 flare mod on the transmission. Wasn't that hard of a job. I got a little scared when i found a couple of check balls and a tiny filter screen on the workbench Big Grin But thanks to my friend google, everything is back in place.

[Image: 20170114_125403_zpspfum95ly.jpg]
Valve body

[Image: 20170114_133530_zps0qeynx5j.jpg]

[Image: 20170114_141506_zpssph9hmq4.jpg]
Drilled this hole to 4mm.

More good news, yesterday i bought a power lock diff from a 1987 Jaguar XJR V12. It als has a better gearratio than the original (closer to the w210).

Fishman
GTA2056V

92
01-18-2017, 10:17 AM #22
Bought this:
[Image: 5f9f0702-ceb7-44d2-8c12-27fd5d22520d_zpsvi5werno.jpg]
Fishman
01-18-2017, 10:17 AM #22

Bought this:
[Image: 5f9f0702-ceb7-44d2-8c12-27fd5d22520d_zpsvi5werno.jpg]

hents99
GT2256V

157
01-19-2017, 03:05 AM #23
What supercharger is it?

------------------------------------------------------------------------
www.elbe.ee - MB performance parts.
hents99
01-19-2017, 03:05 AM #23

What supercharger is it?


------------------------------------------------------------------------
www.elbe.ee - MB performance parts.

Fishman
GTA2056V

92
01-19-2017, 03:06 AM #24
Eaton m112
Fishman
01-19-2017, 03:06 AM #24

Eaton m112

Hario'
C300TD Wagon (W202)

894
01-19-2017, 06:26 PM #25
(01-19-2017, 03:06 AM)Fishman Eaton m112

Awesome, it's either modified by some one or it's USA spec because it never came stock here with a snout that short.

Looking at it, looks like the snout has been machined down, we had to do the same to ours because the normal snout is about 10" long!

You will install turbo blowing though it full compound or with a bypass?

Looking forward to more progress!




Installed:

OM606/722.6, big IC, W220 brakes.
Planned:
DIY manifold, compound, 722.6 controller, built IP.
[i]Less rust.. 
[/i]
Hario'
01-19-2017, 06:26 PM #25

(01-19-2017, 03:06 AM)Fishman Eaton m112

Awesome, it's either modified by some one or it's USA spec because it never came stock here with a snout that short.

Looking at it, looks like the snout has been machined down, we had to do the same to ours because the normal snout is about 10" long!

You will install turbo blowing though it full compound or with a bypass?

Looking forward to more progress!





Installed:

OM606/722.6, big IC, W220 brakes.
Planned:
DIY manifold, compound, 722.6 controller, built IP.
[i]Less rust.. 
[/i]

Fishman
GTA2056V

92
01-20-2017, 12:49 AM #26
It's from a kit made for a Nissan 350z. Yess turbo blowing into supercharger with bypass. Git any ideas on a bypass valve?
Fishman
01-20-2017, 12:49 AM #26

It's from a kit made for a Nissan 350z. Yess turbo blowing into supercharger with bypass. Git any ideas on a bypass valve?

STDGer
TA 0301

52
01-20-2017, 04:50 AM #27
Hey man, nice project.

U can see ur jag on Google, ur sitting near Eindhoven?

Im near the border to roermond, evgeniy is next to Heerlen, if u wanna meet us a day, give a PM Smile
STDGer
01-20-2017, 04:50 AM #27

Hey man, nice project.

U can see ur jag on Google, ur sitting near Eindhoven?

Im near the border to roermond, evgeniy is next to Heerlen, if u wanna meet us a day, give a PM Smile

Fishman
GTA2056V

92
01-20-2017, 10:02 AM #28
Hi, i'm in the North of Holland. Picked up the supercharger in Bad Bentheim.... Big Grin

(01-20-2017, 04:50 AM)STDGer Hey man, nice project.

U can see ur jag on Google, ur sitting near Eindhoven?

Im near the border to roermond, evgeniy is next to Heerlen, if u wanna meet us a day, give a PM Smile
This post was last modified: 01-20-2017, 10:03 AM by Fishman.
Fishman
01-20-2017, 10:02 AM #28

Hi, i'm in the North of Holland. Picked up the supercharger in Bad Bentheim.... Big Grin

(01-20-2017, 04:50 AM)STDGer Hey man, nice project.

U can see ur jag on Google, ur sitting near Eindhoven?

Im near the border to roermond, evgeniy is next to Heerlen, if u wanna meet us a day, give a PM Smile

STDGer
TA 0301

52
01-20-2017, 10:11 AM #29
WTF, have a look on this

https://www.google.de/maps/place/Erbee/@...97!6m1!1e1

google says its next to Eindhoven. Big Grin

I m interested to see how u build in the charger on the preassure side Smile
STDGer
01-20-2017, 10:11 AM #29

WTF, have a look on this

https://www.google.de/maps/place/Erbee/@...97!6m1!1e1

google says its next to Eindhoven. Big Grin

I m interested to see how u build in the charger on the preassure side Smile

Fishman
GTA2056V

92
01-20-2017, 10:13 AM #30
That's where i bought the car ;-)
Want to do it like EDH: http://www.superturbodiesel.com/std/show...p?tid=3199
Fishman
01-20-2017, 10:13 AM #30

That's where i bought the car ;-)
Want to do it like EDH: http://www.superturbodiesel.com/std/show...p?tid=3199

Fishman
GTA2056V

92
01-25-2017, 06:15 AM #31
Got a pressent today.
[Image: 20170125_115911_zpswc12vnvg.jpg]
Fishman
01-25-2017, 06:15 AM #31

Got a pressent today.
[Image: 20170125_115911_zpswc12vnvg.jpg]

Fishman
GTA2056V

92
01-25-2017, 08:57 AM #32
So the supercharger has a bypassvalve built in. Its only 38mm. Too small i guess?
[Image: 20170125_144313_zps0yfshy09.jpg]
Fishman
01-25-2017, 08:57 AM #32

So the supercharger has a bypassvalve built in. Its only 38mm. Too small i guess?
[Image: 20170125_144313_zps0yfshy09.jpg]

Fishman
GTA2056V

92
03-01-2017, 11:23 AM #33
Here we go...
[Image: ef693455-8d15-4643-9f76-6a22556be8d1_zpspe1tfcqn.jpg]

Man what a huge lump.... Hope it will fit.
Fishman
03-01-2017, 11:23 AM #33

Here we go...
[Image: ef693455-8d15-4643-9f76-6a22556be8d1_zpspe1tfcqn.jpg]

Man what a huge lump.... Hope it will fit.

Fishman
GTA2056V

92
03-10-2017, 11:43 AM #34
Progress.... My girlfrient pulled the enige out..
[Image: 17200910_1290730030963246_13013997153971...y2tart.jpg]
Big hole to put a big engine in..
[Image: 17098412_1290730070963242_69219498579860...mmphts.jpg]
Fits easy..
[Image: 17201078_1290835874285995_89601580980277...xk4jtj.jpg]
Fishman
03-10-2017, 11:43 AM #34

Progress.... My girlfrient pulled the enige out..
[Image: 17200910_1290730030963246_13013997153971...y2tart.jpg]
Big hole to put a big engine in..
[Image: 17098412_1290730070963242_69219498579860...mmphts.jpg]
Fits easy..
[Image: 17201078_1290835874285995_89601580980277...xk4jtj.jpg]

Fishman
GTA2056V

92
03-14-2017, 08:52 AM #35
Made an adapter plate to move the enginemounts forward.
[Image: 20170314_135214_zps7er1dpzn.jpg]

Maide bracket for the Jaguar PS pump and mounted the beltpuley.
[Image: 20170314_142417_zpsiykseqtj.jpg]

Degreasing an powerwashing the enginebay. Gonna paint it black with 2K PU paint,
[Image: 20170314_141633_zpsrr9v3f78.jpg]
Fishman
03-14-2017, 08:52 AM #35

Made an adapter plate to move the enginemounts forward.
[Image: 20170314_135214_zps7er1dpzn.jpg]

Maide bracket for the Jaguar PS pump and mounted the beltpuley.
[Image: 20170314_142417_zpsiykseqtj.jpg]

Degreasing an powerwashing the enginebay. Gonna paint it black with 2K PU paint,
[Image: 20170314_141633_zpsrr9v3f78.jpg]

Fishman
GTA2056V

92
03-15-2017, 10:37 AM #36
[Image: 20170315_142841_zpsuakiqn3m.jpg]

Set the pump at 9 degree BTDC.
[Image: 20170315_142053_zpslumem2et.jpg]
Fishman
03-15-2017, 10:37 AM #36

[Image: 20170315_142841_zpsuakiqn3m.jpg]

Set the pump at 9 degree BTDC.
[Image: 20170315_142053_zpslumem2et.jpg]

Fishman
GTA2056V

92
03-15-2017, 10:46 AM #37
Need some help.
What fuel filter do i need?
How do i connect the fuelline to the mech fuelpump om the IP? There is a 14mm thread on there.
Fishman
03-15-2017, 10:46 AM #37

Need some help.
What fuel filter do i need?
How do i connect the fuelline to the mech fuelpump om the IP? There is a 14mm thread on there.

Fishman
GTA2056V

92
03-18-2017, 11:43 AM #38
[Image: 20170318_115740_zpsrq684bpq.jpg]

[Image: 20170318_163746_zpsfhm3oxv1.jpg]
Fishman
03-18-2017, 11:43 AM #38

[Image: 20170318_115740_zpsrq684bpq.jpg]

[Image: 20170318_163746_zpsfhm3oxv1.jpg]

CRD4x4
CompoundSuperTurboDiesel4x4!

399
03-19-2017, 06:49 AM #39
Looking good!
Is the rear sump/pump plug 'n play?
CRD4x4
03-19-2017, 06:49 AM #39

Looking good!
Is the rear sump/pump plug 'n play?

Fishman
GTA2056V

92
03-19-2017, 01:53 PM #40
(03-19-2017, 06:49 AM)CRD4x4 Looking good!
Is the rear sump/pump plug 'n play?

Yes and no. Only the gearboxflange on the sump is different, so the bolts don't fit. I think it can do without these bolts. I had to weld a little bracket to mount the dipsticktube to the sump.
Fishman
03-19-2017, 01:53 PM #40

(03-19-2017, 06:49 AM)CRD4x4 Looking good!
Is the rear sump/pump plug 'n play?

Yes and no. Only the gearboxflange on the sump is different, so the bolts don't fit. I think it can do without these bolts. I had to weld a little bracket to mount the dipsticktube to the sump.

Fishman
GTA2056V

92
03-22-2017, 09:14 AM #41
[Image: 20170322_130626_zpsvqfbwhfr.jpg]
Fishman
03-22-2017, 09:14 AM #41

[Image: 20170322_130626_zpsvqfbwhfr.jpg]

Fishman
GTA2056V

92
03-22-2017, 09:14 AM #42
[Image: 20170322_145803_zpsyxwqvzf8.jpg]
Fishman
03-22-2017, 09:14 AM #42

[Image: 20170322_145803_zpsyxwqvzf8.jpg]

Evgeniy1987
GT2256V

139
03-22-2017, 10:05 AM #43
"Slow project" ... yeah, right Tongue Big Grin Big Grin
Evgeniy1987
03-22-2017, 10:05 AM #43

"Slow project" ... yeah, right Tongue Big Grin Big Grin

Simpler=Better
PORTED HEAD

2,127
03-22-2017, 11:02 AM #44
I'm glad to see that in the Netherlands you also have shelves of half full leftover oil Smile

Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
Simpler=Better
03-22-2017, 11:02 AM #44

I'm glad to see that in the Netherlands you also have shelves of half full leftover oil Smile


Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?

Fishman
GTA2056V

92
03-22-2017, 12:09 PM #45
(03-22-2017, 10:05 AM)Evgeniy1987 "Slow project" ... yeah, right Tongue Big Grin Big Grin
Could go much faster, mut have to wait dor parts all the time...
Fishman
03-22-2017, 12:09 PM #45

(03-22-2017, 10:05 AM)Evgeniy1987 "Slow project" ... yeah, right Tongue Big Grin Big Grin
Could go much faster, mut have to wait dor parts all the time...

Evgeniy1987
GT2256V

139
03-23-2017, 01:20 PM #46
true, true. But still, I admire your work Smile Great to see how you keep an "oldie" alive
Evgeniy1987
03-23-2017, 01:20 PM #46

true, true. But still, I admire your work Smile Great to see how you keep an "oldie" alive

Fishman
GTA2056V

92
03-23-2017, 02:05 PM #47
[Image: 20170323_160017_zps3oteoy5z.jpg]

Thinking of loosing the flexdisc an make a 4cm thick adapterplate between the gearbox and propshaft.
Fishman
03-23-2017, 02:05 PM #47

[Image: 20170323_160017_zps3oteoy5z.jpg]

Thinking of loosing the flexdisc an make a 4cm thick adapterplate between the gearbox and propshaft.

Fishman
GTA2056V

92
03-30-2017, 01:50 PM #48
Driveshaft adapter

[Image: 20170330_170619_zpshzutnloo.jpg]
Fishman
03-30-2017, 01:50 PM #48

Driveshaft adapter

[Image: 20170330_170619_zpshzutnloo.jpg]

Fishman
GTA2056V

92
05-03-2017, 08:26 AM #49
Its alive!

https://youtu.be/1w84qftYDNo
Fishman
05-03-2017, 08:26 AM #49

Its alive!

https://youtu.be/1w84qftYDNo

Evgeniy1987
GT2256V

139
05-03-2017, 09:19 AM #50
Gefeliciteerd!

We are all curious to see it fully assembled and driving.

I am also very curious to see how you will manage it at RDW. Because it is an old car, it probably will be effortless Big Grin
Evgeniy1987
05-03-2017, 09:19 AM #50

Gefeliciteerd!

We are all curious to see it fully assembled and driving.

I am also very curious to see how you will manage it at RDW. Because it is an old car, it probably will be effortless Big Grin

Pages (2): 1 2 Next
 
  • 0 Vote(s) - 0 Average
Users browsing this thread:
 2 Guest(s)
Users browsing this thread:
 2 Guest(s)