STD Tuning Engine 606 remote oil filer

606 remote oil filer

606 remote oil filer

 
  • 0 Vote(s) - 0 Average
 
monstercrawlers
Naturally-aspirated

23
09-24-2015, 04:55 PM #1
Is there anyone using a remote oil filter, I want to make a plate but have read something about a bypass, some saying needed some say don't. Interested to see what people have done and are using. Is there anyone knocking these plates out anywhere
monstercrawlers
09-24-2015, 04:55 PM #1

Is there anyone using a remote oil filter, I want to make a plate but have read something about a bypass, some saying needed some say don't. Interested to see what people have done and are using. Is there anyone knocking these plates out anywhere

monstercrawlers
Naturally-aspirated

23
09-27-2015, 01:52 PM #2
Someone must of done this ??
monstercrawlers
09-27-2015, 01:52 PM #2

Someone must of done this ??

Druk
Holset

297
09-27-2015, 02:37 PM #3
The 606 filter housing has an internal waxstat and diverting channels for the oil. How important they are....who knows?
Druk
09-27-2015, 02:37 PM #3

The 606 filter housing has an internal waxstat and diverting channels for the oil. How important they are....who knows?

barrote
Superturbo

1,627
09-28-2015, 05:12 AM #4
not really important, u can make a plate and atach HYD hoses to it.
adding too much hose may lead to failure in lub in the fist seconds , a check valve before and after solve the problema.
there´s a fórum member who sels those thigs , FRAS is the name, and i belive dieselmeken too
regards...

FD,
Powered by tractor fuel
barrote
09-28-2015, 05:12 AM #4

not really important, u can make a plate and atach HYD hoses to it.
adding too much hose may lead to failure in lub in the fist seconds , a check valve before and after solve the problema.
there´s a fórum member who sels those thigs , FRAS is the name, and i belive dieselmeken too
regards...


FD,
Powered by tractor fuel

starynovy
Holset

338
09-30-2015, 03:57 AM #5
And nicely fitting external filter comes from BMW M60/62 engines. Used for example in E39 540i.

-------------------------------------------------------------------------------------------------------------------------
Ex: 525tds 130kW, C250TD 160kW, E320CDI 200kW, ML400CDI 230kW, A6 R5TDI 130kW
Now: Q7 V8TDI 240kW, 320d 150kW, 335d 210kW
starynovy
09-30-2015, 03:57 AM #5

And nicely fitting external filter comes from BMW M60/62 engines. Used for example in E39 540i.


-------------------------------------------------------------------------------------------------------------------------
Ex: 525tds 130kW, C250TD 160kW, E320CDI 200kW, ML400CDI 230kW, A6 R5TDI 130kW
Now: Q7 V8TDI 240kW, 320d 150kW, 335d 210kW

SurfRodder
Jackass Extraordinaire

611
10-05-2015, 04:09 PM #6
I made a plate for my w123 with om617 from 25mm aluminium plate. I ended up using nylon braided hose as it was much more flexible than the stainless I first tried. Originally I just ran without a thermostatic controller but I did find one on a racing parts site (Summit or Jegs or maybe Speedway) that had the appropriate temperatures and big enough AN fittings. So it will *work* without any immediate problems, but I'd imagine the engine will take a bit longer to warm up if the oil is being cooled right away. (I didn't really notice anything but I generally warm my cars up a bit before driving anyway). Edit: the one I installed is similar to this one: http://www.summitracing.com/parts/prm-1075/overview/

If you have the engine out of the vehicle you can likely also tap the block directly for AN (JIC 37 or whatever the standard is called) fittings. On the OM617 there were several holes on the block but only 2 are actually used. Most block off plates only have one inlet and one outlet. It helps to look at the factory drawings of the original oil tower when you make your plate.

2nd Edit: See pics of my old setup in Post #66 here: http://www.superturbodiesel.com/std/show...366&page=2
This post was last modified: 10-05-2015, 04:42 PM by SurfRodder.

W123 Mods: 4 speed ** manual climate control ** '85 Kalitucky intake ** manual windows & full tint ** Euro headlights retrofit w/bixenon projectors ** 4 brake light mod ** Vogtland 50mm drop front & Lesjofors S600 drop rear springs ** 16" rims ** late w126 brake spindles, rotors & calipers ** full suspension rehab ** Bilstein HDs ** AL129X alternator & 1/0 starter and charging cables ** 300GD clutch/flywheel ** AFCO 80103N radiator & Earl's 41610 oil cooler ** custom block-off plate, remote oil filter & t-stat ** MW IP w/ tomnik's 6.5mm 'Holly' elements **

S124 Mods: 400E Rear subframe ** SL600 Brakes ** Late 300E 210mm diff ** SLK230 6 speed ** 17" CLK rims ** Vented RF Fender ** Facelift Hood, Headlights, and Lower Cladding **

OBK# 62
SurfRodder
10-05-2015, 04:09 PM #6

I made a plate for my w123 with om617 from 25mm aluminium plate. I ended up using nylon braided hose as it was much more flexible than the stainless I first tried. Originally I just ran without a thermostatic controller but I did find one on a racing parts site (Summit or Jegs or maybe Speedway) that had the appropriate temperatures and big enough AN fittings. So it will *work* without any immediate problems, but I'd imagine the engine will take a bit longer to warm up if the oil is being cooled right away. (I didn't really notice anything but I generally warm my cars up a bit before driving anyway). Edit: the one I installed is similar to this one: http://www.summitracing.com/parts/prm-1075/overview/

If you have the engine out of the vehicle you can likely also tap the block directly for AN (JIC 37 or whatever the standard is called) fittings. On the OM617 there were several holes on the block but only 2 are actually used. Most block off plates only have one inlet and one outlet. It helps to look at the factory drawings of the original oil tower when you make your plate.

2nd Edit: See pics of my old setup in Post #66 here: http://www.superturbodiesel.com/std/show...366&page=2


W123 Mods: 4 speed ** manual climate control ** '85 Kalitucky intake ** manual windows & full tint ** Euro headlights retrofit w/bixenon projectors ** 4 brake light mod ** Vogtland 50mm drop front & Lesjofors S600 drop rear springs ** 16" rims ** late w126 brake spindles, rotors & calipers ** full suspension rehab ** Bilstein HDs ** AL129X alternator & 1/0 starter and charging cables ** 300GD clutch/flywheel ** AFCO 80103N radiator & Earl's 41610 oil cooler ** custom block-off plate, remote oil filter & t-stat ** MW IP w/ tomnik's 6.5mm 'Holly' elements **

S124 Mods: 400E Rear subframe ** SL600 Brakes ** Late 300E 210mm diff ** SLK230 6 speed ** 17" CLK rims ** Vented RF Fender ** Facelift Hood, Headlights, and Lower Cladding **

OBK# 62

F.R.A.S
Holset

579
10-06-2015, 01:59 AM #7
m103 Smile

F-tune Performance [Image: V-band_om606.jpg] [Image: GTX3582R.jpg] [Image: gs6-53dz_gearbox.jpg]

I can help you out with all your manual transmission, clutch, flywheel, intake and exhaust manifold issues.
F.R.A.S
10-06-2015, 01:59 AM #7

m103 Smile


F-tune Performance [Image: V-band_om606.jpg] [Image: GTX3582R.jpg] [Image: gs6-53dz_gearbox.jpg]

I can help you out with all your manual transmission, clutch, flywheel, intake and exhaust manifold issues.

monstercrawlers
Naturally-aspirated

23
10-06-2015, 03:31 PM #8
Does the filter housing from the m103 fit the 606,, screw on filter if I'm correct
monstercrawlers
10-06-2015, 03:31 PM #8

Does the filter housing from the m103 fit the 606,, screw on filter if I'm correct

F.R.A.S
Holset

579
10-07-2015, 04:34 AM #9
Yes it's a spin-off filter on the m103 and the housing is bot on to the om60x engines. So a cheap sandwich adapter and so on and you are home free. I use a Volvo turbo sandwich with built in thermostat for my external oilcooler on the om604.

F-tune Performance [Image: V-band_om606.jpg] [Image: GTX3582R.jpg] [Image: gs6-53dz_gearbox.jpg]

I can help you out with all your manual transmission, clutch, flywheel, intake and exhaust manifold issues.
F.R.A.S
10-07-2015, 04:34 AM #9

Yes it's a spin-off filter on the m103 and the housing is bot on to the om60x engines. So a cheap sandwich adapter and so on and you are home free. I use a Volvo turbo sandwich with built in thermostat for my external oilcooler on the om604.


F-tune Performance [Image: V-band_om606.jpg] [Image: GTX3582R.jpg] [Image: gs6-53dz_gearbox.jpg]

I can help you out with all your manual transmission, clutch, flywheel, intake and exhaust manifold issues.

monstercrawlers
Naturally-aspirated

23
10-07-2015, 04:37 PM #10
Thanx Fras, you're the man. Took some finding but I have one on way
monstercrawlers
10-07-2015, 04:37 PM #10

Thanx Fras, you're the man. Took some finding but I have one on way

F.R.A.S
Holset

579
10-08-2015, 02:52 AM #11
(10-07-2015, 04:37 PM)monstercrawlers Thanx Fras, you're the man. Took some finding but I have one on way

Haha, no problem. If I can I always try to help out.

F-tune Performance [Image: V-band_om606.jpg] [Image: GTX3582R.jpg] [Image: gs6-53dz_gearbox.jpg]

I can help you out with all your manual transmission, clutch, flywheel, intake and exhaust manifold issues.
F.R.A.S
10-08-2015, 02:52 AM #11

(10-07-2015, 04:37 PM)monstercrawlers Thanx Fras, you're the man. Took some finding but I have one on way

Haha, no problem. If I can I always try to help out.


F-tune Performance [Image: V-band_om606.jpg] [Image: GTX3582R.jpg] [Image: gs6-53dz_gearbox.jpg]

I can help you out with all your manual transmission, clutch, flywheel, intake and exhaust manifold issues.

Hario'
C300TD Wagon (W202)

894
10-08-2015, 06:04 AM #12
(10-07-2015, 04:34 AM)F.R.A.S Yes it's a spin-off filter on the m103 and the housing is bot on to the om60x engines. So a cheap sandwich adapter and so on and you are home free. I use a Volvo turbo sandwich with built in thermostat for my external oilcooler on the om604.

FRAS MAN what Volvo engine is the sandwich plate with waxstat from? The waxstat bypass cost loads on their own!

Beers, H.




Installed:

OM606/722.6, big IC, W220 brakes.
Planned:
DIY manifold, compound, 722.6 controller, built IP.
[i]Less rust.. 
[/i]
Hario'
10-08-2015, 06:04 AM #12

(10-07-2015, 04:34 AM)F.R.A.S Yes it's a spin-off filter on the m103 and the housing is bot on to the om60x engines. So a cheap sandwich adapter and so on and you are home free. I use a Volvo turbo sandwich with built in thermostat for my external oilcooler on the om604.

FRAS MAN what Volvo engine is the sandwich plate with waxstat from? The waxstat bypass cost loads on their own!

Beers, H.





Installed:

OM606/722.6, big IC, W220 brakes.
Planned:
DIY manifold, compound, 722.6 controller, built IP.
[i]Less rust.. 
[/i]

F.R.A.S
Holset

579
10-09-2015, 02:05 AM #13
740 turbo Smile Not on all models though. Had to drill the center a bit but it's all good. Have had zero problems with the install and are using a 7" spin off filter from some Volvo model.

F-tune Performance [Image: V-band_om606.jpg] [Image: GTX3582R.jpg] [Image: gs6-53dz_gearbox.jpg]

I can help you out with all your manual transmission, clutch, flywheel, intake and exhaust manifold issues.
F.R.A.S
10-09-2015, 02:05 AM #13

740 turbo Smile Not on all models though. Had to drill the center a bit but it's all good. Have had zero problems with the install and are using a 7" spin off filter from some Volvo model.


F-tune Performance [Image: V-band_om606.jpg] [Image: GTX3582R.jpg] [Image: gs6-53dz_gearbox.jpg]

I can help you out with all your manual transmission, clutch, flywheel, intake and exhaust manifold issues.

 
  • 0 Vote(s) - 0 Average
Users browsing this thread:
 2 Guest(s)
Users browsing this thread:
 2 Guest(s)