Superpump builder in USA
Superpump builder in USA
04-30-2015, 08:50 PM
#106
The pump is 140cc W/external ALDA limiting max fuel to 90cc for now. The motor and turbo are stock for now, I have to sort some driveline issues 1st. The increase in power is unbelievable. Top gear (1:1 5th, 2.65 R&P stock tire height) accel from 70-90 is insane considering stock turbo.
I have a slight rolling idle on startup that stabilizes in ~5-8 seconds. This may be due to my request for nearly full fuel at 6000 rpm, rather than a lack of expertise. The guy who does the Bosch inline pumps there was also known for working MW pumps when Tomnik was selling his 6.5mm elements.
As far as price, if the tuner doesn't post it, I won't post it. And I honestly don't remember. I got it a good while back, the V2 elements came out a while ago. The only reason I installed it before putting the big turbo on was that I needed a pick-me-up because my clutch is bumming me out.
One more thing, the pressure lever or whatever it's called has to move farther back to return to idle. This means the throttle and cruise linkage would have held the throttle open if not adjusted to compensate. They would have held it open enough to damage the motor if it couldn't be turned off quickly enough. I think a lot of pumps are like that but nobody mentions it.
raysorenson
04-30-2015, 08:50 PM #106Turnaround was fuct but that was a supply issue. They had 1st gen 7.5mm elements but all parties involved wanted to wait for Goran to send 7.5mm V2 elements.
The pump is 140cc W/external ALDA limiting max fuel to 90cc for now. The motor and turbo are stock for now, I have to sort some driveline issues 1st. The increase in power is unbelievable. Top gear (1:1 5th, 2.65 R&P stock tire height) accel from 70-90 is insane considering stock turbo.
I have a slight rolling idle on startup that stabilizes in ~5-8 seconds. This may be due to my request for nearly full fuel at 6000 rpm, rather than a lack of expertise. The guy who does the Bosch inline pumps there was also known for working MW pumps when Tomnik was selling his 6.5mm elements.
As far as price, if the tuner doesn't post it, I won't post it. And I honestly don't remember. I got it a good while back, the V2 elements came out a while ago. The only reason I installed it before putting the big turbo on was that I needed a pick-me-up because my clutch is bumming me out.
One more thing, the pressure lever or whatever it's called has to move farther back to return to idle. This means the throttle and cruise linkage would have held the throttle open if not adjusted to compensate. They would have held it open enough to damage the motor if it couldn't be turned off quickly enough. I think a lot of pumps are like that but nobody mentions it.
Messages In This Thread
Superpump builder in USA - by dieselmeken - 10-09-2013, 05:38 AM
Whuuuh....whuuuuh....WHUUUUUUUUUT!!! - by mbz123 - 10-09-2013, 08:31 AM
RE: Superpump builder in USA - by raysorenson - 10-09-2013, 09:12 AM
RE: Superpump builder in USA - by willbhere4u - 10-09-2013, 10:02 AM
RE: Superpump builder in USA - by scout2000 - 10-09-2013, 10:05 AM
RE: Superpump builder in USA - by dieselmeken - 10-09-2013, 12:50 PM
RE: Superpump builder in USA - by Joaquin Suave - 10-09-2013, 10:22 AM
RE: Superpump builder in USA - by winmutt - 10-09-2013, 12:51 PM
RE: Superpump builder in USA - by DeliveryValve - 10-09-2013, 12:52 PM
RE: Superpump builder in USA - by 95e300dez - 10-09-2013, 03:56 PM
RE: Superpump builder in USA - by dieselmeken - 10-11-2013, 01:06 AM
RE: Superpump builder in USA - by 1911diesel - 10-09-2013, 04:46 PM
RE: Superpump builder in USA - by bricktron - 10-10-2013, 11:39 AM
RE: Superpump builder in USA - by sassparilla_kid - 10-10-2013, 02:21 PM
RE: Superpump builder in USA - by mike-81-240d - 10-10-2013, 02:25 PM
RE: Superpump builder in USA - by w123love - 10-10-2013, 07:13 PM
RE: Superpump builder in USA - by zeeman - 10-20-2013, 11:19 PM
RE: Superpump builder in USA - by dieselmeken - 10-21-2013, 12:25 AM
RE: Superpump builder in USA - by gsxr - 10-21-2013, 12:33 PM
RE: Superpump builder in USA - by zeeman - 10-21-2013, 08:56 PM
RE: Superpump builder in USA - by CRD4x4 - 10-21-2013, 07:50 AM
RE: Superpump builder in USA - by zeeman - 10-21-2013, 08:21 AM
RE: Superpump builder in USA - by Simpler=Better - 10-21-2013, 09:07 AM
RE: Superpump builder in USA - by MFSuper90 - 10-21-2013, 09:20 AM
RE: Superpump builder in USA - by dieselmeken - 10-21-2013, 11:09 AM
RE: Superpump builder in USA - by Simpler=Better - 10-21-2013, 01:09 PM
RE: Superpump builder in USA - by CRD4x4 - 10-21-2013, 03:37 PM
RE: Superpump builder in USA - by willbhere4u - 10-21-2013, 03:46 PM
RE: Superpump builder in USA - by MFSuper90 - 10-21-2013, 02:22 PM
RE: Superpump builder in USA - by mike-81-240d - 10-22-2013, 12:41 PM
RE: Superpump builder in USA - by CRD4x4 - 10-22-2013, 02:11 PM
RE: Superpump builder in USA - by Joaquin Suave - 10-23-2013, 10:14 AM
RE: Superpump builder in USA - by zeeman - 10-23-2013, 11:47 AM
RE: Superpump builder in USA - by DeliveryValve - 10-23-2013, 07:52 PM
RE: Superpump builder in USA - by Simpler=Better - 10-23-2013, 09:42 PM
RE: Superpump builder in USA - by dieselmeken - 10-24-2013, 10:15 AM
RE: Superpump builder in USA - by CRD4x4 - 10-24-2013, 09:42 PM
RE: Superpump builder in USA - by dieselmeken - 10-25-2013, 12:33 AM
RE: Superpump builder in USA - by gsxr - 10-25-2013, 11:17 AM
RE: Superpump builder in USA - by SurfRodder - 11-24-2013, 12:12 AM
RE: Superpump builder in USA - by Triker - 10-24-2013, 03:57 PM
RE: Superpump builder in USA - by Simpler=Better - 10-25-2013, 09:44 AM
RE: Superpump builder in USA - by Jetmugg - 10-29-2013, 10:18 AM
RE: Superpump builder in USA - by vica153 - 10-30-2013, 05:39 PM
RE: Superpump builder in USA - by willbhere4u - 10-31-2013, 10:12 AM
RE: Superpump builder in USA - by vica153 - 10-31-2013, 04:20 PM
RE: Superpump builder in USA - by Bangaway - 10-31-2013, 08:28 PM
RE: Superpump builder in USA - by mikes02ls1 - 11-01-2013, 09:22 PM
RE: Superpump builder in USA - by dieselmeken - 11-02-2013, 02:43 AM
RE: Superpump builder in USA - by MFSuper90 - 11-01-2013, 09:48 PM
RE: Superpump builder in USA - by vica153 - 11-03-2013, 03:28 AM
RE: Superpump builder in USA - by 97e300 - 11-05-2013, 01:15 AM
RE: Superpump builder in USA - by mikes02ls1 - 11-12-2013, 09:07 PM
RE: Superpump builder in USA - by vica153 - 11-13-2013, 03:06 PM
RE: Superpump builder in USA - by sassparilla_kid - 11-15-2013, 02:08 PM
RE: Superpump builder in USA - by Onedakine - 11-21-2013, 10:34 PM
RE: Superpump builder in USA - by Simpler=Better - 11-22-2013, 09:55 AM
RE: Superpump builder in USA - by vica153 - 12-14-2013, 04:06 AM
RE: Superpump builder in USA - by MFSuper90 - 12-14-2013, 12:28 PM
RE: Superpump builder in USA - by vica153 - 12-14-2013, 02:47 PM
RE: Superpump builder in USA - by Joaquin Suave - 12-14-2013, 11:05 PM
RE: Superpump builder in USA - by vica153 - 12-18-2013, 12:33 AM
RE: Superpump builder in USA - by SurfRodder - 12-15-2013, 12:45 AM
RE: Superpump builder in USA - by winmutt - 12-17-2013, 12:43 PM
RE: Superpump builder in USA - by addicted56 - 01-11-2014, 07:35 AM
RE: Superpump builder in USA - by vica153 - 01-12-2014, 08:08 PM
RE: Superpump builder in USA - by vica153 - 01-22-2014, 05:12 PM
RE: Superpump builder in USA - by Insane190d - 01-23-2014, 05:16 PM
RE: Superpump builder in USA - by Gearbound - 01-23-2014, 05:33 PM
RE: Superpump builder in USA - by Insane190d - 01-23-2014, 08:13 PM
RE: Superpump builder in USA - by vica153 - 01-23-2014, 09:32 PM
RE: Superpump builder in USA - by winmutt - 01-24-2014, 07:25 AM
RE: Superpump builder in USA - by Gearbound - 01-24-2014, 01:28 PM
RE: Superpump builder in USA - by raysorenson - 01-26-2014, 04:34 PM
RE: Superpump builder in USA - by Joaquin Suave - 01-27-2014, 05:21 PM
RE: Superpump builder in USA - by Insane190d - 01-27-2014, 06:06 PM
RE: Superpump builder in USA - by TurboTim - 02-25-2014, 05:42 PM
RE: Superpump builder in USA - by vica153 - 04-09-2014, 03:47 PM
RE: Superpump builder in USA - by TurboTim - 04-09-2014, 08:40 PM
RE: Superpump builder in USA - by Gearbound - 04-10-2014, 12:51 AM
RE: Superpump builder in USA - by jenyus - 04-10-2014, 02:43 AM
RE: Superpump builder in USA - by 85-300D - 04-21-2014, 11:17 AM
RE: Superpump builder in USA - by yatzee - 06-12-2014, 12:52 PM
RE: Superpump builder in USA - by TurboTim - 07-09-2014, 09:10 PM
RE: Superpump builder in USA - by vica153 - 07-26-2014, 01:29 AM
RE: Superpump builder in USA - by masterstill - 07-26-2014, 09:56 AM
RE: Superpump builder in USA - by vica153 - 07-26-2014, 02:48 PM
RE: Superpump builder in USA - by vica153 - 07-28-2014, 01:31 AM
RE: Superpump builder in USA - by 4x4Cal - 07-30-2014, 12:09 PM
RE: Superpump builder in USA - by winmutt - 07-28-2014, 03:28 PM
RE: Superpump builder in USA - by yatzee - 07-30-2014, 02:43 PM
RE: Superpump builder in USA - by vica153 - 07-30-2014, 11:23 PM
RE: Superpump builder in USA - by 4x4Cal - 07-31-2014, 01:41 PM
RE: Superpump builder in USA - by masterstill - 08-04-2014, 08:59 AM
RE: Superpump builder in USA - by Simpler=Better - 08-04-2014, 09:27 AM
RE: Superpump builder in USA - by vica153 - 08-04-2014, 09:37 PM
RE: Superpump builder in USA - by masterstill - 08-05-2014, 11:31 AM
RE: Superpump builder in USA - by vica153 - 08-06-2014, 03:49 AM
RE: Superpump builder in USA - by yatzee - 10-17-2014, 05:52 PM
RE: Superpump builder in USA - by vica153 - 10-25-2014, 02:43 PM
RE: Superpump builder in USA - by NapaBavarian - 11-11-2014, 10:20 AM
RE: Superpump builder in USA - by bhowell_10 - 01-05-2015, 08:30 PM
RE: Superpump builder in USA - by jenyus - 04-28-2015, 01:30 PM
RE: Superpump builder in USA - by raysorenson - 04-30-2015, 11:33 AM
RE: Superpump builder in USA - by jenyus - 04-30-2015, 03:43 PM
RE: Superpump builder in USA - by raysorenson - 04-30-2015, 08:50 PM
RE: Superpump builder in USA - by Kenny1813 - 05-12-2015, 01:59 PM
RE: Superpump builder in USA - by raysorenson - 07-04-2015, 09:23 AM
RE: Superpump builder in USA - by Hario' - 11-11-2015, 07:12 AM
RE: Superpump builder in USA - by Vict0r - 02-24-2019, 03:19 PM
RE: Superpump builder in USA - by atypicalguy - 03-02-2019, 01:49 PM
Users browsing this thread:
5 Guest(s)
5 Guest(s)
Users browsing this thread:
5 Guest(s)
5 Guest(s)