Bolt patterns, flanges, mounts etc

Duncansport

02-19-2014, 12:45 PM #5

(02-18-2014, 07:37 PM)fcp After some months, I am pleased to be able to include the files here to allow you to fabricate adapter plates to match the OM606 bellhousing to the BMW GS6-53DZ transmission (late model version, 2009 or so on).

The files included are complete PDF drawings for both sides of the plate. I have a Solidworks e-drawing file (you can download edrawing viewer for free online) so you can see how it all goes together and some DXF files for those that can use them. This site won't let me post them here it seems (maybe a mod can help out?), I'll find some way to list them though so people can get to them.

At the time of writing (Feb 18 2014), these are version '2.5-Final' and I believe them to be correct, but I will designate them 'RC1' (as officially a pre-release official version) until I get some feedback from others that they are OK, at which point I'll re-publish a final version here.

For those who aren't interested in this gearbox (which incidentally requires custom clutch/ flywheel) the OM606 bellhousing pattern will have other uses for members in the community I hope :-)

If you create derivative works from these drawings, please make sure you upload them for others to benefit from.

Now the important stuff!

These files are released to the community with the following disclaimer:

I make no warranty, guarantee or assertion in any respect of this design, its suitability or appropriateness to the use to which you may put it. If it breaks, blows up your engine, destroys your gearbox or in any way harms or endangers life limb, property or your sanity then by making use of this design (or any derivative) you accept full and entire responsibility for any consequences!

I make no guarantee that the measurements herin contained are correct, or that the approach or techniques used to design or transcribe the designs are correct.

I am NOT an engineer and if you are in any way unsure of the suitability of the design for your purpose you should consult someone who is!

Please note, no assertion is made in regard to title or use of original designs, IP or proprietary information which resides with the respective property rights holders. Citing 'Fair Use', these designs are released to the community for informational, educational, NON COMMERCIAL purposes and you should seek professional legal advice if any any doubt.

Thanks to everyone here are elsewhere who helped me with advice and opinion on this design. If you want to see the progress I am making, please see my Flickr account

Please post pictures of any project you use these on too

Finally, if you like the design and find time, do send me a postcard to say hi from wherever you live: NowWeComply, Cody Technology Park, Old Ively Road, Farnborough, Hampshire, GU14 0LX, UK.

Have Fun Ben

Nice work, looks great

Reply

View a Printable Version

4 Vote(s) - 3 Average

Users browsing this thread:
6 Guest(s)