300D build thread (finally)
300D build thread (finally)
Well I am almost done with the climate control delete! Not as tough as I thought, but took awhile to get all the wiring figured out so I could minimize extra wiring. Pics to come whenever I get it totally done,
Probably a week or two out yet.
In the mean time I have been making a clutch for my pulling tractor. As aftermarket clutches have to be custom made and are very expensive, I decided to try to make my own. I took the stock pressure plate spring dimensions, entered it into century springs online spring finder and came up with a spring close to the same dimensions, but nearly double the rated pressure. After installing them I realized the stock cast fingers were not going to handle the huge plate load. So I made my own "billet" fingers made with a grinder and a piece of 1/2" plate. Here's some pics for fun.
Top is stock, middle is what I started with and the bottom is the finish product
Old vs new springs
Springs in the pressure place