300D build thread (finally)
300D build thread (finally)
(08-08-2013, 07:33 AM)MFSuper90 I might have to do that sometime sassparilla, probably not anytime soon though. I am leaving for college in a little more than a week. Im not real keen on electronic stuff either.
Well made some major progress on the old girl yesterday. Got my hx30 almost fitted and my intercooler ready to be plumbed from the charger.
Had to cut off the EGR port on my exhaust manifold to get the hx30 to fit because the housing is a tad bit larger. On a good note though, the stock oil drain bolts up perfectly. Got my exhaust all hooked up and welded together, not looking too bad acutally. Today on the to do list is to get my turbo oil supply line created, and somehow plumb the intake to the intercooler. If I get lucky maybe run water lines to the IC
I have decided to pull the stock AC condensor out and replace it with some type of heat exchanger, probably like a trans cooler or something close to those lines. I decided against the stock AC unit because of how small the high pressure side line is, I think it would create a pretty large restriction.
Pics to come after the 12th, I ran out of gigs on my monthly plan so I cant upload pics until it resets lol
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
(08-08-2013, 07:33 AM)MFSuper90 I might have to do that sometime sassparilla, probably not anytime soon though. I am leaving for college in a little more than a week. Im not real keen on electronic stuff either.
Well made some major progress on the old girl yesterday. Got my hx30 almost fitted and my intercooler ready to be plumbed from the charger.
Had to cut off the EGR port on my exhaust manifold to get the hx30 to fit because the housing is a tad bit larger. On a good note though, the stock oil drain bolts up perfectly. Got my exhaust all hooked up and welded together, not looking too bad acutally. Today on the to do list is to get my turbo oil supply line created, and somehow plumb the intake to the intercooler. If I get lucky maybe run water lines to the IC
I have decided to pull the stock AC condensor out and replace it with some type of heat exchanger, probably like a trans cooler or something close to those lines. I decided against the stock AC unit because of how small the high pressure side line is, I think it would create a pretty large restriction.
Pics to come after the 12th, I ran out of gigs on my monthly plan so I cant upload pics until it resets lol
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?