Flywheel 717.432 and OM602

STD Tuning Drivetrain Flywheel 717.432 and OM602

View a Printable Version

0 Vote(s) - 0 Average

Druk

Holset

297

04-23-2013, 08:06 AM #9

Non-dualmass input shaft sticks out past the front face of the bellhousing by...

24.58mm or 0.96inches.

Probably about 3/4" more than a dualmass shaft so easily identified.

Derek.

Druk

04-23-2013, 08:06 AM #9

Non-dualmass input shaft sticks out past the front face of the bellhousing by...

24.58mm or 0.96inches.

Probably about 3/4" more than a dualmass shaft so easily identified.

Derek.

View a Printable Version

0 Vote(s) - 0 Average

Messages In This Thread

Flywheel 717.432 and OM602 - by Duncansport - 04-21-2013, 06:01 PM

RE: Flywheel 717.432 and OM602 - by Duncansport - 04-21-2013, 07:38 PM

RE: Flywheel 717.432 and OM602 - by aaa - 04-21-2013, 08:06 PM

RE: Flywheel 717.432 and OM602 - by Duncansport - 04-21-2013, 09:38 PM

RE: Flywheel 717.432 and OM602 - by Druk - 04-22-2013, 05:01 PM

RE: Flywheel 717.432 and OM602 - by Duncansport - 04-22-2013, 06:33 PM

RE: Flywheel 717.432 and OM602 - by Duncansport - 04-22-2013, 02:02 PM

RE: Flywheel 717.432 and OM602 - by raysorenson - 04-23-2013, 07:45 AM

RE: Flywheel 717.432 and OM602 - by Druk - 04-23-2013, 08:06 AM

RE: Flywheel 717.432 and OM602 - by Duncansport - 05-15-2013, 12:15 PM

RE: Flywheel 717.432 and OM602 - by aaa - 05-16-2013, 08:46 AM

RE: Flywheel 717.432 and OM602 - by SurfRodder - 05-20-2013, 02:33 PM

RE: Flywheel 717.432 and OM602 - by SixSpeed - 08-04-2019, 02:15 AM

RE: Flywheel 717.432 and OM602 - by madmog - 08-05-2019, 03:07 AM

Users browsing this thread:
2 Guest(s)