Flywheel 717.432 and OM602
Flywheel 717.432 and OM602
04-22-2013, 06:33 PM
#7
(04-22-2013, 05:01 PM)DrukThanks a bunch!(04-21-2013, 09:38 PM)Duncansport Well scrap that its a 717.430..... 300e assembly. Guess I need a oe standard single mass flywheel..
Not so sure. My 717.450 came from a 320e and it's dual mass. I have a gearbox in the garage from a single mass 230e. Wait till tomorrow Scottish time and I'll measure the protrusion of the input past the bellhousing and post on here. The single mass shaft is approx 1/2" longer than the DM.
.
Seems like the 190 16V is a direct bolt on and sourcing a clutch is fairly easy compared to the 300E set up...
Duncansport
04-22-2013, 06:33 PM #7(04-22-2013, 05:01 PM)DrukThanks a bunch!(04-21-2013, 09:38 PM)Duncansport Well scrap that its a 717.430..... 300e assembly. Guess I need a oe standard single mass flywheel..
Not so sure. My 717.450 came from a 320e and it's dual mass. I have a gearbox in the garage from a single mass 230e. Wait till tomorrow Scottish time and I'll measure the protrusion of the input past the bellhousing and post on here. The single mass shaft is approx 1/2" longer than the DM.
.
Seems like the 190 16V is a direct bolt on and sourcing a clutch is fairly easy compared to the 300E set up...
Messages In This Thread
Flywheel 717.432 and OM602 - by Duncansport - 04-21-2013, 06:01 PM
RE: Flywheel 717.432 and OM602 - by Duncansport - 04-21-2013, 07:38 PM
RE: Flywheel 717.432 and OM602 - by aaa - 04-21-2013, 08:06 PM
RE: Flywheel 717.432 and OM602 - by Duncansport - 04-21-2013, 09:38 PM
RE: Flywheel 717.432 and OM602 - by Druk - 04-22-2013, 05:01 PM
RE: Flywheel 717.432 and OM602 - by Duncansport - 04-22-2013, 06:33 PM
RE: Flywheel 717.432 and OM602 - by Duncansport - 04-22-2013, 02:02 PM
RE: Flywheel 717.432 and OM602 - by raysorenson - 04-23-2013, 07:45 AM
RE: Flywheel 717.432 and OM602 - by Druk - 04-23-2013, 08:06 AM
RE: Flywheel 717.432 and OM602 - by Duncansport - 05-15-2013, 12:15 PM
RE: Flywheel 717.432 and OM602 - by aaa - 05-16-2013, 08:46 AM
RE: Flywheel 717.432 and OM602 - by SurfRodder - 05-20-2013, 02:33 PM
RE: Flywheel 717.432 and OM602 - by SixSpeed - 08-04-2019, 02:15 AM
RE: Flywheel 717.432 and OM602 - by madmog - 08-05-2019, 03:07 AM
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Users browsing this thread:
1 Guest(s)
1 Guest(s)