WTB: 617 Air intake set up
WTB: 617 Air intake set up
02-16-2012, 12:13 PM
#1
this is going to be used for my 240 turbo project.
let me know what you have.
Also I am not put off by a little rust as I will just sand blast and repaint it.
Purplecomputer
02-16-2012, 12:13 PM #1Im looking for the 617 Turbo air intake. Im going to need pretty much everything, the hose, mounting brackets the air filter housing and hey if you want to throw in the actual air filter thats fine!
this is going to be used for my 240 turbo project.
let me know what you have.
Also I am not put off by a little rust as I will just sand blast and repaint it.
02-16-2012, 03:11 PM
#2
Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
Simpler=Better
02-16-2012, 03:11 PM #2My neighbor has 2. What price range are you looking to spend?
Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
02-16-2012, 03:40 PM
#3
(02-16-2012, 03:11 PM)Simpler=Better My neighbor has 2. What price range are you looking to spend?
Not really sure what the whole set goes for. Just make me an offer
Purplecomputer
02-16-2012, 03:40 PM #3(02-16-2012, 03:11 PM)Simpler=Better My neighbor has 2. What price range are you looking to spend?
Not really sure what the whole set goes for. Just make me an offer
02-20-2012, 08:55 AM
#4
Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
Simpler=Better
02-20-2012, 08:55 AM #4$100 plus shipping sound reasonable? I'll check with him tonight.
Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
02-20-2012, 11:49 AM
#5
'84 300 SD w126 Race Car
'86 190E 2.3 w201 Daily Driver
'85 500 SEL w126 Scraped
'92 1.6 Geo Storm Totaled by a Uninsured Driver
serverman777
02-20-2012, 11:49 AM #5I can make you one for free out of PVC pipe as long you pay for parts and shipping. It would be like 27 bucks for the pipe and filter and a few bucks for shipping.
'84 300 SD w126 Race Car
'86 190E 2.3 w201 Daily Driver
'85 500 SEL w126 Scraped
'92 1.6 Geo Storm Totaled by a Uninsured Driver
02-20-2012, 12:31 PM
#6
Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
Simpler=Better
02-20-2012, 12:31 PM #6Using one of the round paper filter? That's what I ran on my car. Works great and way less complicated than the stock setup
Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
02-20-2012, 02:56 PM
#7
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
sassparilla_kid
02-20-2012, 02:56 PM #7Yeah its much simpler, and frees up valuable real estate in the engine compartment for stuff like an IC
-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
02-20-2012, 11:00 PM
#8
'84 300 SD w126 Race Car
'86 190E 2.3 w201 Daily Driver
'85 500 SEL w126 Scraped
'92 1.6 Geo Storm Totaled by a Uninsured Driver
serverman777
02-20-2012, 11:00 PM #8Or a bigger turbo in my case
'84 300 SD w126 Race Car
'86 190E 2.3 w201 Daily Driver
'85 500 SEL w126 Scraped
'92 1.6 Geo Storm Totaled by a Uninsured Driver
02-21-2012, 10:11 AM
#9
Purplecomputer
02-21-2012, 10:11 AM #9I was planning on going the "looks like this turbo 240 came out of the factory"
02-21-2012, 03:01 PM
#10
Do you need an oil filter housing with the turbo oil lines and stuff attached? I have one on an engine I don't need if you want it?
'98 E300 Turbo "Juliette" - Brabus wheels and almost all the options a w210 could have
'87 300D Turbo "Roxanne" - #22 head - 400E brakes - EGR Delete - 17" Staggered AMG 5 spoke rims from CLK500 - 5 Spd manual
2007 Chevy 2500HD CCSB Duramax with about 400-500 rwhp depending on the tune I use
1983 300D Silver Exterior/Black inside - Sold and will be missed, may we never meet in a PnP.
2007 Chevy 2500HD CCSB Duramax with about 400-500 rwhp depending on the tune I use
1983 300D Silver Exterior/Black inside - Sold and will be missed, may we never meet in a PnP.
I have an extra 617a air box... I think it's in pretty good shape to. I might have all the elbows and stuff that goes with it. How is $40 plus shipping? Let me see what pieces I have that I can send you and I'll get you some pictures.
Do you need an oil filter housing with the turbo oil lines and stuff attached? I have one on an engine I don't need if you want it?
'98 E300 Turbo "Juliette" - Brabus wheels and almost all the options a w210 could have
'87 300D Turbo "Roxanne" - #22 head - 400E brakes - EGR Delete - 17" Staggered AMG 5 spoke rims from CLK500 - 5 Spd manual
2007 Chevy 2500HD CCSB Duramax with about 400-500 rwhp depending on the tune I use
1983 300D Silver Exterior/Black inside - Sold and will be missed, may we never meet in a PnP.
2007 Chevy 2500HD CCSB Duramax with about 400-500 rwhp depending on the tune I use
1983 300D Silver Exterior/Black inside - Sold and will be missed, may we never meet in a PnP.
02-21-2012, 04:21 PM
#11
(02-21-2012, 03:01 PM)capflya I have an extra 617a air box... I think it's in pretty good shape to. I might have all the elbows and stuff that goes with it. How is $40 plus shipping? Let me see what pieces I have that I can send you and I'll get you some pictures.
Do you need an oil filter housing with the turbo oil lines and stuff attached? I have one on an engine I don't need if you want it?
Actually if that oil filter housing has the mechanic oil pressure fitting then yes. The one i currntly have is from a 300sd.
Send me picturea to my email. Ill pm you
Purplecomputer
02-21-2012, 04:21 PM #11(02-21-2012, 03:01 PM)capflya I have an extra 617a air box... I think it's in pretty good shape to. I might have all the elbows and stuff that goes with it. How is $40 plus shipping? Let me see what pieces I have that I can send you and I'll get you some pictures.
Do you need an oil filter housing with the turbo oil lines and stuff attached? I have one on an engine I don't need if you want it?
Actually if that oil filter housing has the mechanic oil pressure fitting then yes. The one i currntly have is from a 300sd.
Send me picturea to my email. Ill pm you
02-21-2012, 06:52 PM
#12
Ninth Year Anniversary with STD on 1-9-2020
visit: www.dieselfuelinjector.guru
Project 2018: Really get the car finished -- Turbo OM617 greater than 175 MPH goal.
RED W123 - left Germany as 240D in 1982. Full AMG body kit less rear apron, 2:65LSD, five speed Getrag 717.400, manual steering, read leather interior, manual brake conversion, electric water pump (EWP), and a bunch of other goodies ...
I have a very nice bracket with virtually new rubber bushings (x3) with the correct steel cups (x3). Will sell the entire deal for $10 plus whatever shipping is.
Ninth Year Anniversary with STD on 1-9-2020
visit: www.dieselfuelinjector.guru
Project 2018: Really get the car finished -- Turbo OM617 greater than 175 MPH goal.
RED W123 - left Germany as 240D in 1982. Full AMG body kit less rear apron, 2:65LSD, five speed Getrag 717.400, manual steering, read leather interior, manual brake conversion, electric water pump (EWP), and a bunch of other goodies ...
02-21-2012, 07:10 PM
#13
(02-21-2012, 06:52 PM)Greazzer I have a very nice bracket with virtually new rubber bushings (x3) with the correct steel cups (x3). Will sell the entire deal for $10 plus whatever shipping is.
ill see what other memebers has and what others dont that way i can mix and match parts from forum members to make a complete set.
Purplecomputer
02-21-2012, 07:10 PM #13(02-21-2012, 06:52 PM)Greazzer I have a very nice bracket with virtually new rubber bushings (x3) with the correct steel cups (x3). Will sell the entire deal for $10 plus whatever shipping is.
ill see what other memebers has and what others dont that way i can mix and match parts from forum members to make a complete set.
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Users browsing this thread:
2 Guest(s)
2 Guest(s)