wtb Steel tubing

STD Other FS / WTB / Buying guides wtb Steel tubing

wtb Steel tubing

wtb Steel tubing

View a Printable Version

0 Vote(s) - 0 Average

larsalan

Superturbo

1,272

09-17-2010, 08:43 PM #1

I'll worry about the welding once I have the tubing.
Where is the cheapest/best place to score some 3" tubing?

I saw some 3ft sections on ebay for 30ish
or
5 ft for $52

probably need at least 5ft from the down pipe to muffler

This post was last modified: 09-17-2010, 08:54 PM by larsalan.

larsalan

09-17-2010, 08:43 PM #1

I'll worry about the welding once I have the tubing.
Where is the cheapest/best place to score some 3" tubing?

I saw some 3ft sections on ebay for 30ish
or
5 ft for $52

probably need at least 5ft from the down pipe to muffler

winmutt

bitbanger

3,468

09-20-2010, 01:04 PM #2

Homedepot?

1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42

winmutt

09-20-2010, 01:04 PM #2

Homedepot?

1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42

larsalan

Superturbo

1,272

09-20-2010, 01:33 PM #3

(09-20-2010, 01:04 PM)winmutt Homedepot?

Like from a chainlink fence Wink

Wink

I read that it might be just as cost effective to go to midas and have them open up the exhaust a bit.

larsalan

09-20-2010, 01:33 PM #3

(09-20-2010, 01:04 PM)winmutt Homedepot?

Like from a chainlink fence Wink

Wink

I read that it might be just as cost effective to go to midas and have them open up the exhaust a bit.

winmutt

bitbanger

3,468

09-20-2010, 02:04 PM #4

Ya I would just take it to a low rent muffler place. Probably cost 100 or so.

1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42

winmutt

09-20-2010, 02:04 PM #4

Ya I would just take it to a low rent muffler place. Probably cost 100 or so.

1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42

Oddball

7

12-01-2010, 04:49 AM #5

hey just an FYI, i had an entire exhaust system that i designed, fabricated AND installed by a local shop (he does the BEST work with the BEST pipe) for $170 (i supplied the muffler and a cat) for my 1984 BMW e30 318i... 2 1/4 from the manifold back (he even fabbed up a "collector" if you will for the goofy manifold on that m10 engine... dont get hosed... if you cant find it cheaper let me know how many feet you want and the gauge you want the wall thickness... i can get it for you, where in IL are you (feel free to PM)

There's no replacement for displacement... except for the TURBO IN MY BASEMENT! Big Grin

Big Grin

AMCtilldeath

12-01-2010, 04:49 AM #5

hey just an FYI, i had an entire exhaust system that i designed, fabricated AND installed by a local shop (he does the BEST work with the BEST pipe) for $170 (i supplied the muffler and a cat) for my 1984 BMW e30 318i... 2 1/4 from the manifold back (he even fabbed up a "collector" if you will for the goofy manifold on that m10 engine... dont get hosed... if you cant find it cheaper let me know how many feet you want and the gauge you want the wall thickness... i can get it for you, where in IL are you (feel free to PM)

There's no replacement for displacement... except for the TURBO IN MY BASEMENT! Big Grin

Big Grin

larsalan

Superturbo

1,272

12-01-2010, 08:22 AM #6

(12-01-2010, 04:49 AM)AMCtilldeath i can get it for you, where in IL are you (feel free to PM)

http://cgi.ebay.com/ebaymotors/2-5-409-S...2164wt_607

I was thinking one 5' of this would do it. Just need to find out what size the pipe pre resonator is. And I hope the turn down on the muffler is the same size so I can reuse it.
Also need to borrow my buddy's welder and learn to weld. Oh, and some high temp sealant.
thanks though

This post was last modified: 12-01-2010, 08:23 AM by larsalan.

Rusted out beat down 300d turbo 82' -- RIP
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'

larsalan

12-01-2010, 08:22 AM #6

(12-01-2010, 04:49 AM)AMCtilldeath i can get it for you, where in IL are you (feel free to PM)

http://cgi.ebay.com/ebaymotors/2-5-409-S...2164wt_607

I was thinking one 5' of this would do it. Just need to find out what size the pipe pre resonator is. And I hope the turn down on the muffler is the same size so I can reuse it.
Also need to borrow my buddy's welder and learn to weld. Oh, and some high temp sealant.
thanks though

Rusted out beat down 300d turbo 82' -- RIP
Nice body, tons of ridiculous mechanical issues - 300d turbo 82' /motor 85'

View a Printable Version

0 Vote(s) - 0 Average

Users browsing this thread:
1 Guest(s)

Users browsing this thread:
1 Guest(s)