Swirl Prechambers
Swirl Prechambers
06-14-2010, 08:32 AM
#4
Attached Files
Image(s)
ForcedInduction
06-14-2010, 08:32 AM
#4
He would need to machine new lower injector bodies to fit the new thread pitch.
Attached Files
Image(s)
06-14-2010, 01:55 PM
#5
(06-14-2010, 08:32 AM)ForcedInduction He would need to machine new lower injector bodies to fit the new thread pitch.
I thought the problem would be more in the prechamber? In the om60x don't they sit at and angle in relation to the engine? Looked for an image in the W124 fsm without much luck.
1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
(06-14-2010, 08:32 AM)ForcedInduction He would need to machine new lower injector bodies to fit the new thread pitch.
I thought the problem would be more in the prechamber? In the om60x don't they sit at and angle in relation to the engine? Looked for an image in the W124 fsm without much luck.
1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
06-14-2010, 02:27 PM
#6
1982 300D Turbo ... 3,6xxlbs, No fan, No AC, Hood Stack, No ALDA, No rear bumper and stuffed front, A/W Intercooled, Injectors by Greezer and HUGE Pre-Chambers with help from OM616 & Simpler=Better, Fuel Cranked up, 60 Trim Compressor wheel, EGT, EMP, Boost 50" Rigid Radius bar on roof Aux tank for a total of 48 Gal Of Diesel! Odyssey PC-1750 Battery in trunk, 27"x8.5"/R14 Maxxis BigHorn Mud Terrains, In June '14 issue of Off Road Mag
AX15 Jeep Trans swap in progress....
Captain America
06-14-2010, 02:27 PM #6Ooooooooooooooooooooooooo! thats a sexy injector!
1982 300D Turbo ... 3,6xxlbs, No fan, No AC, Hood Stack, No ALDA, No rear bumper and stuffed front, A/W Intercooled, Injectors by Greezer and HUGE Pre-Chambers with help from OM616 & Simpler=Better, Fuel Cranked up, 60 Trim Compressor wheel, EGT, EMP, Boost 50" Rigid Radius bar on roof Aux tank for a total of 48 Gal Of Diesel! Odyssey PC-1750 Battery in trunk, 27"x8.5"/R14 Maxxis BigHorn Mud Terrains, In June '14 issue of Off Road Mag
AX15 Jeep Trans swap in progress....
06-14-2010, 08:08 PM
#7
ForcedInduction
06-14-2010, 08:08 PM
#7
The angle is in the collar. Problem is the swirl engines use different thread lines as well so the injectors aren't a straight swap like the prechamber.
06-15-2010, 07:07 AM
#9
(06-14-2010, 08:08 PM)ForcedInduction The angle is in the collar. Problem is the swirl engines use different thread lines as well so the injectors aren't a straight swap like the prechamber.
the PC aren't straight swap either.
One thing is to cut/unscrew them and combine a lower part 617a with the upper part of an 60x somehow.
Don't know about the outer diameter but it is doable.
Tom
(06-14-2010, 08:08 PM)ForcedInduction The angle is in the collar. Problem is the swirl engines use different thread lines as well so the injectors aren't a straight swap like the prechamber.
the PC aren't straight swap either.
One thing is to cut/unscrew them and combine a lower part 617a with the upper part of an 60x somehow.
Don't know about the outer diameter but it is doable.
Tom
06-15-2010, 04:43 PM
#11
(06-15-2010, 03:29 PM)Einar I think early 60X-injectors and 61X-injectors have almost the same body and treads, or am I far away?They are identical other than the model of nozzle used.
The 602/603 we are talking about with the angled prechambers are only found in the 1989+ W140 and 300D 2.5 models (in the US).
Quote:1989 - "Diesel '89" initiativehttp://www.worldcarfans.com/10612135485/...pth/page11
In 1989, Mercedes-Benz presents revised engines which cut particulate emissions by around 40 percent. Their features include a new pre-chamber with oblique fuel injection, which enables more efficient combustion. The diesel technology improvement program under which these engines are developed is called the "Diesel '89" initiative.
Also, I made a mistake; the updated injectors screw into the prechambers instead of the collars.
This post was last modified: 06-15-2010, 04:44 PM by ForcedInduction.
Attached Files
Image(s)ForcedInduction
06-15-2010, 04:43 PM
#11
(06-15-2010, 03:29 PM)Einar I think early 60X-injectors and 61X-injectors have almost the same body and treads, or am I far away?They are identical other than the model of nozzle used.
The 602/603 we are talking about with the angled prechambers are only found in the 1989+ W140 and 300D 2.5 models (in the US).
Quote:1989 - "Diesel '89" initiativehttp://www.worldcarfans.com/10612135485/...pth/page11
In 1989, Mercedes-Benz presents revised engines which cut particulate emissions by around 40 percent. Their features include a new pre-chamber with oblique fuel injection, which enables more efficient combustion. The diesel technology improvement program under which these engines are developed is called the "Diesel '89" initiative.
Also, I made a mistake; the updated injectors screw into the prechambers instead of the collars.
Attached Files
Image(s)
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Users browsing this thread:
1 Guest(s)
1 Guest(s)