STD Tuning Engine .60 trim compressor wheel

.60 trim compressor wheel

.60 trim compressor wheel

 
  • 0 Vote(s) - 0 Average
 
Torkey
Dirty Diesel

220
04-13-2012, 08:47 AM #1
I tried to install a .60trim compressor wheel last night and it fits great except for the compressor housing. I remember reading that others have done this but can't find the threads.
Do I need to get a different housing or is there a workaround?
Torkey
04-13-2012, 08:47 AM #1

I tried to install a .60trim compressor wheel last night and it fits great except for the compressor housing. I remember reading that others have done this but can't find the threads.
Do I need to get a different housing or is there a workaround?

willbhere4u
Six in a row make her go!

2,507
04-13-2012, 11:04 AM #2
You need to machine out the center of the compressor housing any good turbo shop should be able to do it

1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
willbhere4u
04-13-2012, 11:04 AM #2

You need to machine out the center of the compressor housing any good turbo shop should be able to do it


1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running

Torkey
Dirty Diesel

220
04-13-2012, 10:53 PM #3
Thansk for the info. Took me most of the day calling around before I finally found someone to do the work. Only 5 hours away. I think I will be mailing it.
Torkey
04-13-2012, 10:53 PM #3

Thansk for the info. Took me most of the day calling around before I finally found someone to do the work. Only 5 hours away. I think I will be mailing it.

willbhere4u
Six in a row make her go!

2,507
04-14-2012, 10:41 PM #4
cool good luck take some pics when you get it done!

1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
willbhere4u
04-14-2012, 10:41 PM #4

cool good luck take some pics when you get it done!


1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running

Torkey
Dirty Diesel

220
04-24-2012, 03:57 PM #5
Got the .60 trim wheel installed. Really like it. Taking it to the dyno on Friday to see how much it helped.
Torkey
04-24-2012, 03:57 PM #5

Got the .60 trim wheel installed. Really like it. Taking it to the dyno on Friday to see how much it helped.

willbhere4u
Six in a row make her go!

2,507
04-24-2012, 09:22 PM #6
cool post some videos

1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
willbhere4u
04-24-2012, 09:22 PM #6

cool post some videos


1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running

Torkey
Dirty Diesel

220
05-08-2012, 08:51 PM #7
I put it on the dyne and was expecting great results. The car seemed to have so much more horsepower but the results were nada. The car feels better but I think that's due to better throttle response and not pure HP. Any ideas what could be going on here?
Torkey
05-08-2012, 08:51 PM #7

I put it on the dyne and was expecting great results. The car seemed to have so much more horsepower but the results were nada. The car feels better but I think that's due to better throttle response and not pure HP. Any ideas what could be going on here?

sassparilla_kid
diesel > all other fuels

1,618
05-08-2012, 10:31 PM #8
You need more fuel to go with that extra air!! Right now its probably just building more boost faster, so it will have the same amount of HP but it will just come sooner. This is my theory anyway, I could be wrong

-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!
sassparilla_kid
05-08-2012, 10:31 PM #8

You need more fuel to go with that extra air!! Right now its probably just building more boost faster, so it will have the same amount of HP but it will just come sooner. This is my theory anyway, I could be wrong


-1982 300D Turbo, 280k miles, ALDA apparently maxxed, fram 8038, 12 lbs boost, non-egr manifolds, W/M injection, 4 brake light mod, Gen II w126 front rotors/calipers, 4-speed swap
In the works: A/W IC, adjust pump, turbo rebuild (w/60 trim comp wheel)
-1980 300SD, 110k, project car. Goal is to get it lookin' like it did on the showroom floor (body and interior wise, not necessarily under the hood )
-1974 240D, FRESH PAINT!!!!!!

DeliveryValve
Superturbo

1,338
05-09-2012, 01:37 AM #9
Yep you need more fuel.

Read up on Full load thread sticky.


.

Gota love Mercedes Diesels!



.
DeliveryValve
05-09-2012, 01:37 AM #9

Yep you need more fuel.

Read up on Full load thread sticky.


.


Gota love Mercedes Diesels!



.

Torkey
Dirty Diesel

220
05-09-2012, 10:41 AM #10
I definitely will be turning up the pump but I'm wondering if the extra HP is being used up pushing the bigger compressor wheel or maybe the waste gate isn't able to keep up and creating back pressure.
Torkey
05-09-2012, 10:41 AM #10

I definitely will be turning up the pump but I'm wondering if the extra HP is being used up pushing the bigger compressor wheel or maybe the waste gate isn't able to keep up and creating back pressure.

poleshady
GTA2056V

78
05-21-2013, 03:13 PM #11
where did you get your comp wheel from?
poleshady
05-21-2013, 03:13 PM #11

where did you get your comp wheel from?

mike-81-240d
more like mike-84-300d now

427
05-22-2013, 02:25 AM #12
What were your dyno readings?

1981 Mercedes 300TD Lowered 4 speed manual Holset HX30 
mike-81-240d
05-22-2013, 02:25 AM #12

What were your dyno readings?


1981 Mercedes 300TD Lowered 4 speed manual Holset HX30 

 
  • 0 Vote(s) - 0 Average
Users browsing this thread:
 2 Guest(s)
Users browsing this thread:
 2 Guest(s)