+- STD (https://www.superturbodiesel.com/std)
+-- Forum: Tuning (https://www.superturbodiesel.com/std/forumdisplay.php?fid=6)
+--- Forum: Engine (https://www.superturbodiesel.com/std/forumdisplay.php?fid=7)
+--- Thread: .60 trim compressor wheel (/showthread.php?tid=3541)
.60 trim compressor wheel - Torkey - 04-13-2012
I tried to install a .60trim compressor wheel last night and it fits great except for the compressor housing. I remember reading that others have done this but can't find the threads.
Do I need to get a different housing or is there a workaround?
RE: .60 trim compressor wheel - willbhere4u - 04-13-2012
You need to machine out the center of the compressor housing any good turbo shop should be able to do it
RE: .60 trim compressor wheel - Torkey - 04-13-2012
Thansk for the info. Took me most of the day calling around before I finally found someone to do the work. Only 5 hours away. I think I will be mailing it.
RE: .60 trim compressor wheel - willbhere4u - 04-14-2012
cool good luck take some pics when you get it done!
RE: .60 trim compressor wheel - Torkey - 04-24-2012
Got the .60 trim wheel installed. Really like it. Taking it to the dyno on Friday to see how much it helped.
RE: .60 trim compressor wheel - willbhere4u - 04-24-2012
cool post some videos
RE: .60 trim compressor wheel - Torkey - 05-08-2012
I put it on the dyne and was expecting great results. The car seemed to have so much more horsepower but the results were nada. The car feels better but I think that's due to better throttle response and not pure HP. Any ideas what could be going on here?
RE: .60 trim compressor wheel - sassparilla_kid - 05-08-2012
You need more fuel to go with that extra air!! Right now its probably just building more boost faster, so it will have the same amount of HP but it will just come sooner. This is my theory anyway, I could be wrong
RE: .60 trim compressor wheel - DeliveryValve - 05-09-2012
Yep you need more fuel.
Read up on Full load thread sticky.
.
RE: .60 trim compressor wheel - Torkey - 05-09-2012
I definitely will be turning up the pump but I'm wondering if the extra HP is being used up pushing the bigger compressor wheel or maybe the waste gate isn't able to keep up and creating back pressure.
RE: .60 trim compressor wheel - poleshady - 05-21-2013
where did you get your comp wheel from?
RE: .60 trim compressor wheel - mike-81-240d - 05-22-2013
What were your dyno readings?