W210 mods?
W210 mods?
09-04-2019, 03:47 AM
#6
(08-28-2019, 05:00 PM)AlanMcR(08-28-2019, 03:46 AM)Tobulus ... I run a He221w with the big turbine housing on my 606 and I am very happy with it. ...Photos? What adapter plate works?
It looks like the He221w is boost controlled, rather than controlled by vacuum. How is it interfaced with the ECU?
I did not buy any adapter plates. Just made one from 8mm steel. the lower two boltholes of both flanges line up, so there is two srews going through both flanges and the adapter, the upper boltholes are srewed into the adapter. The exhaust channels almost perfectly line up.
Just leave it boost controlled. The ecu should be modified, either the boost request map should be remapped to meet the boost of the turbo, or just remove the boost error to prevent the ecu from going into limp mode.
(08-28-2019, 05:00 PM)AlanMcR(08-28-2019, 03:46 AM)Tobulus ... I run a He221w with the big turbine housing on my 606 and I am very happy with it. ...Photos? What adapter plate works?
It looks like the He221w is boost controlled, rather than controlled by vacuum. How is it interfaced with the ECU?
I did not buy any adapter plates. Just made one from 8mm steel. the lower two boltholes of both flanges line up, so there is two srews going through both flanges and the adapter, the upper boltholes are srewed into the adapter. The exhaust channels almost perfectly line up.
Just leave it boost controlled. The ecu should be modified, either the boost request map should be remapped to meet the boost of the turbo, or just remove the boost error to prevent the ecu from going into limp mode.
Messages In This Thread
W210 mods? - by Insane190d - 08-26-2019, 09:09 PM
RE: W210 mods? - by Tobulus - 08-28-2019, 03:46 AM
RE: W210 mods? - by dcm - 08-28-2019, 03:41 PM
RE: W210 mods? - by AlanMcR - 08-28-2019, 05:00 PM
RE: W210 mods? - by Tobulus - 09-04-2019, 03:47 AM
RE: W210 mods? - by Insane190d - 08-28-2019, 09:30 PM
RE: W210 mods? - by Insane190d - 03-10-2020, 05:40 PM
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Users browsing this thread:
1 Guest(s)
1 Guest(s)