injection noise/nailing
injection noise/nailing
05-03-2010, 09:27 PM
#1
It has been getting worse to night I replace some collapsed leaking fuel supply line and filters and it stopped nailing almost completely!
So I thought I would crack each injector to listen for any noise! If I crack cylinders 1,2,4 the car will slow down and Nail really badly! If i crack # 3 it slows down but no noise nailing
If the engine drops even slightly below idle it starts nailing really badly on #3
I'm going to swap injectors this weakened and see if the problem follows the injector or if it stay my guess is a weak injection pump.
As rebuilding the injectors and doing a valve adjustment hasn't changed it
1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
willbhere4u
05-03-2010, 09:27 PM #1So my 240d turbo is nailing badly at idle when hot!
It has been getting worse to night I replace some collapsed leaking fuel supply line and filters and it stopped nailing almost completely!
So I thought I would crack each injector to listen for any noise! If I crack cylinders 1,2,4 the car will slow down and Nail really badly! If i crack # 3 it slows down but no noise nailing
If the engine drops even slightly below idle it starts nailing really badly on #3
I'm going to swap injectors this weakened and see if the problem follows the injector or if it stay my guess is a weak injection pump.
As rebuilding the injectors and doing a valve adjustment hasn't changed it
1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
Messages In This Thread
injection noise/nailing - by willbhere4u - 05-03-2010, 09:27 PM
RE: injection noise/nailing - by dude99 - 05-03-2010, 09:54 PM
RE: injection noise/nailing - by willbhere4u - 05-03-2010, 10:02 PM
RE: injection noise/nailing - by Alastair E - 05-04-2010, 01:39 PM
RE: injection noise/nailing - by willbhere4u - 05-04-2010, 08:42 PM
RE: injection noise/nailing - by tomnik - 05-05-2010, 06:37 AM
RE: injection noise/nailing - by willbhere4u - 05-05-2010, 11:48 AM
RE: injection noise/nailing - by tomnik - 05-05-2010, 02:57 PM
RE: injection noise/nailing - by willbhere4u - 05-05-2010, 05:28 PM
RE: injection noise/nailing - by Einar - 05-07-2010, 01:37 AM
RE: injection noise/nailing - by willbhere4u - 05-07-2010, 09:14 AM
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Users browsing this thread:
1 Guest(s)
1 Guest(s)