+- STD (https://www.superturbodiesel.com/std)
+-- Forum: Tuning (https://www.superturbodiesel.com/std/forumdisplay.php?fid=6)
+--- Forum: Engine (https://www.superturbodiesel.com/std/forumdisplay.php?fid=7)
+--- Thread: Final version Om606 EGR defeat? (/showthread.php?tid=7837)
Final version Om606 EGR defeat? - Photomonkey - 08-17-2017
Hi guys,
I've been slowly modding my E300 W210 and it's time to tackle the EGR defeat.
Digging through old posts it's hard to see what the final result was for the resistors in the resistor/diode solution. Most places seem to reference the same relevant wires, the same diode, and at least one resisitor. Some threads however have a higher resistance on the defeat circuit.
Can anyone clarify which version seems to be happiest?
Thanks in advance for the knowledge and help.
1999 E300 TD
RE: Final version Om606 EGR defeat? - barrote - 08-17-2017
Egr?
Where u live u can't find aluminum sheet?
Just phisically block the thing. ?
RE: Final version Om606 EGR defeat? - pryantcc - 08-18-2017
(08-17-2017, 01:35 PM)barrote Just phisically block the thing. ?
Don't you still have to fool the computer into thinking that it has been opened with the resister + diode combination?
RE: Final version Om606 EGR defeat? - baldur - 08-18-2017
(08-18-2017, 08:03 AM)pryantcc(08-17-2017, 01:35 PM)barrote Just phisically block the thing. ?
Don't you still have to fool the computer into thinking that it has been opened with the resister + diode combination?
Not if you leave the valve in place and connected. The resistor trick is to trick the computer into thinking the valve is still in place if it's been removed altogether.
RE: Final version Om606 EGR defeat? - Hario' - 08-18-2017
I got limp when I did that, apparently it compares against maf reading, anticipating reduced maf when egr is open.
seant chipped ecu? get more power then also..
RE: Final version Om606 EGR defeat? - Mr.Emo - 08-18-2017
Mine is blocked without resistor, havn't triggered limp yet.
RE: Final version Om606 EGR defeat? - MartinB - 08-20-2017
Because you have not MAF.
RE: Final version Om606 EGR defeat? - Mr.Emo - 08-20-2017
I've got a 98 with maf.
RE: Final version Om606 EGR defeat? - AlanMcR - 08-25-2017
(08-20-2017, 11:00 PM)Mr.Emo I've got a 98 with maf.
Have you had the ECU tuned? Often the EGR function is deleted in the process.
RE: Final version Om606 EGR defeat? - Mr.Emo - 08-28-2017
No idea tbh. Hasn't bothered me yet. Anyone know of a cheap solution to do diagnosis on the w210?
RE: Final version Om606 EGR defeat? - oleg213 - 08-28-2017
FTDI k-line adapter(VAG-COM) and cracked Carsoft for Mercedes, Cascade. allow you to read and erase DTC
RE: Final version Om606 EGR defeat? - Mr.Emo - 08-28-2017
You know where to get the carsoft? Can't find anything at all. :o
RE: Final version Om606 EGR defeat? - oleg213 - 08-29-2017
Try that https://yadi.sk/d/JYX8MnlA3MQn2q
RE: Final version Om606 EGR defeat? - Mr.Emo - 08-29-2017
1mb? :o