+- STD (https://www.superturbodiesel.com/std)
+-- Forum: Tuning (https://www.superturbodiesel.com/std/forumdisplay.php?fid=6)
+--- Forum: Engine (https://www.superturbodiesel.com/std/forumdisplay.php?fid=7)
+--- Thread: Om603 pump not wot when pedal is full compressed (/showthread.php?tid=7558)
Om603 pump not wot when pedal is full compressed - hummermaniac88 - 01-02-2017
Hi, when my pedal is fully floored my pump still has about 1 inch from wot. Am I missing something in my set up?
RE: Om603 pump not wot when pedal is full compressed - Flo.Pe - 01-02-2017
Hi, is it a pump whit bigger elements?
At mine 603 ip was the same after rebuilding to 7,5mm elements, the way from the pump is longer as the way from the throttle cable/pedal,
so you must go down whit the cable on the pump lever or build a (i dont now the right word) transmission/linkage with an short lever for the cable and an long for the pump.
RE: Om603 pump not wot when pedal is full compressed - Hario' - 01-02-2017
You could move the cable end where it attaches to the bell crank, nearer to the pivot point to get more throw for the same cable movement.
RE: Om603 pump not wot when pedal is full compressed - hummermaniac88 - 01-03-2017
Thanks guys.
RE: Om603 pump not wot when pedal is full compressed - 50harleyrider - 01-10-2017
Issues like that are why I went with a Bosch e-pump and Baldurs' ecu. I bet a lot of guys will be using them on 603 and 606 in the future.