+- STD (https://www.superturbodiesel.com/std)
+-- Forum: Tuning (https://www.superturbodiesel.com/std/forumdisplay.php?fid=6)
+--- Forum: Engine (https://www.superturbodiesel.com/std/forumdisplay.php?fid=7)
+--- Thread: oil bypass filter system (/showthread.php?tid=2143)
oil bypass filter system - W116Lorinser - 01-13-2011
just a quick question for the guys who have done this.
Do i just run the return hose from the bypass line to my oil cap on the valve cover after drilling the cap and installing a fitting.
And where would i run the oil supply line? would i have to tap the oil filter housing?
thanks
RE: oil bypass filter system - ForcedInduction - 01-13-2011
(01-13-2011, 12:47 AM)W116Lorinser Do i just run the return hose from the bypass line to my oil cap on the valve cover after drilling the cap and installing a fitting.The return can be anywhere that is a lower pressure than the feed source.
Quote:And where would i run the oil supply line? would i have to tap the oil filter housing?Any pressure source will work. You can tap a fitting into the turbo's banjo bolt for example.