STD Tuning Suspension W210 E55 rear swaybar 20mm.

W210 E55 rear swaybar 20mm.

W210 E55 rear swaybar 20mm.

 
  • 0 Vote(s) - 0 Average
 
winmutt
bitbanger

3,468
08-03-2016, 07:43 AM #1
Red bar is W210 16.5mm I had used on my 87 300d. Black bar is new W210 E55 bar, 20mm.



[Image: e55.rear.swaybar.1.jpg] [Image: e55.rear.swaybar.2.jpg]
This post was last modified: 08-03-2016, 07:43 AM by winmutt.

1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
winmutt
08-03-2016, 07:43 AM #1

Red bar is W210 16.5mm I had used on my 87 300d. Black bar is new W210 E55 bar, 20mm.



[Image: e55.rear.swaybar.1.jpg] [Image: e55.rear.swaybar.2.jpg]


1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42

SurfRodder
Jackass Extraordinaire

611
08-08-2016, 03:54 PM #2
Nice...it's hard to tell from the pic, but it looks like there is no provision/notch for the SLS arm on the new one?

W123 Mods: 4 speed ** manual climate control ** '85 Kalitucky intake ** manual windows & full tint ** Euro headlights retrofit w/bixenon projectors ** 4 brake light mod ** Vogtland 50mm drop front & Lesjofors S600 drop rear springs ** 16" rims ** late w126 brake spindles, rotors & calipers ** full suspension rehab ** Bilstein HDs ** AL129X alternator & 1/0 starter and charging cables ** 300GD clutch/flywheel ** AFCO 80103N radiator & Earl's 41610 oil cooler ** custom block-off plate, remote oil filter & t-stat ** MW IP w/ tomnik's 6.5mm 'Holly' elements **

S124 Mods: 400E Rear subframe ** SL600 Brakes ** Late 300E 210mm diff ** SLK230 6 speed ** 17" CLK rims ** Vented RF Fender ** Facelift Hood, Headlights, and Lower Cladding **

OBK# 62
SurfRodder
08-08-2016, 03:54 PM #2

Nice...it's hard to tell from the pic, but it looks like there is no provision/notch for the SLS arm on the new one?


W123 Mods: 4 speed ** manual climate control ** '85 Kalitucky intake ** manual windows & full tint ** Euro headlights retrofit w/bixenon projectors ** 4 brake light mod ** Vogtland 50mm drop front & Lesjofors S600 drop rear springs ** 16" rims ** late w126 brake spindles, rotors & calipers ** full suspension rehab ** Bilstein HDs ** AL129X alternator & 1/0 starter and charging cables ** 300GD clutch/flywheel ** AFCO 80103N radiator & Earl's 41610 oil cooler ** custom block-off plate, remote oil filter & t-stat ** MW IP w/ tomnik's 6.5mm 'Holly' elements **

S124 Mods: 400E Rear subframe ** SL600 Brakes ** Late 300E 210mm diff ** SLK230 6 speed ** 17" CLK rims ** Vented RF Fender ** Facelift Hood, Headlights, and Lower Cladding **

OBK# 62

atypicalguy
Holset

555
06-11-2018, 12:19 AM #3
Yah that's my issue also: getting a thicker bar that will work with sls. The 500e rear bar would have been perfect, but is now NLA.
atypicalguy
06-11-2018, 12:19 AM #3

Yah that's my issue also: getting a thicker bar that will work with sls. The 500e rear bar would have been perfect, but is now NLA.

atypicalguy
Holset

555
06-11-2018, 12:22 AM #4
It's either this w210 e55 bar or the one from the w211. I think maybe an e430 wagon bar might also work.
atypicalguy
06-11-2018, 12:22 AM #4

It's either this w210 e55 bar or the one from the w211. I think maybe an e430 wagon bar might also work.

atypicalguy
Holset

555
06-13-2018, 08:49 PM #5
OK so the e55 is about 21mm and the w211 looks like 18mm. I'm guessing 18mm (500e diameter also) is enough for sporty street driving.
atypicalguy
06-13-2018, 08:49 PM #5

OK so the e55 is about 21mm and the w211 looks like 18mm. I'm guessing 18mm (500e diameter also) is enough for sporty street driving.

winmutt
bitbanger

3,468
07-05-2018, 10:15 AM #6
Re notch, I'd just grind a surface in and quench in oil...

1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
winmutt
07-05-2018, 10:15 AM #6

Re notch, I'd just grind a surface in and quench in oil...


1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42

atypicalguy
Holset

555
07-16-2018, 08:56 PM #7
(07-05-2018, 10:15 AM)winmutt Re notch, I'd just grind a surface in and quench in oil...

I bought the 211 AMG one. Will see how it fits. I think I will have to bend the ends in a bit.
atypicalguy
07-16-2018, 08:56 PM #7

(07-05-2018, 10:15 AM)winmutt Re notch, I'd just grind a surface in and quench in oil...

I bought the 211 AMG one. Will see how it fits. I think I will have to bend the ends in a bit.

 
  • 0 Vote(s) - 0 Average
Users browsing this thread:
 2 Guest(s)
Users browsing this thread:
 2 Guest(s)