STD Other Projects om617 yota

om617 yota

om617 yota

 
  • 0 Vote(s) - 0 Average
 
yota4life
K26-2

40
05-28-2014, 10:07 AM #1
Figured id start a build thread here too. Its a 91 yota bagged and body dropped on 18s with a rx7 ors 2x3 back half and om617a. I picked up 2 motors for 500$ bought the adapter kit from tdswaps. Longest 7 months to receive my parts ever one excuse after another. Still need to get it running been lagging on it and no extra cash to buy some parts plus im moving and the trucks going to storage for awhile. On to some pics

[Image: 20140324_161859.jpg]

[Image: 20140324_161846.jpg]

[Image: IMG_20140324_161014.jpg]


[Image: IMG_20140522_202700.jpg]

[Image: 20140522_200910.jpg]
yota4life
05-28-2014, 10:07 AM #1

Figured id start a build thread here too. Its a 91 yota bagged and body dropped on 18s with a rx7 ors 2x3 back half and om617a. I picked up 2 motors for 500$ bought the adapter kit from tdswaps. Longest 7 months to receive my parts ever one excuse after another. Still need to get it running been lagging on it and no extra cash to buy some parts plus im moving and the trucks going to storage for awhile. On to some pics

[Image: 20140324_161859.jpg]

[Image: 20140324_161846.jpg]

[Image: IMG_20140324_161014.jpg]


[Image: IMG_20140522_202700.jpg]

[Image: 20140522_200910.jpg]

MFSuper90
Budget Builder

1,533
05-29-2014, 09:11 AM #2
Defintely not my style, but the craftsmanship of all the work you are doing is amazing! Are you leaving the hood stack?
And did reroute the Bowden cable to the cruise control?

Cool project Smile
This post was last modified: 05-29-2014, 09:11 AM by MFSuper90.

'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler Big Grin
'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted         
MFSuper90
05-29-2014, 09:11 AM #2

Defintely not my style, but the craftsmanship of all the work you are doing is amazing! Are you leaving the hood stack?
And did reroute the Bowden cable to the cruise control?

Cool project Smile


'82 300D -3" straight pipe, ALDA deleted, 3in1 glowshift gauge, HX30, egr-less manifold, A/W intercooler Big Grin
'14 Ram 6.7l cummins -G56 handshaker, wishing it was deleted         

yota4life
K26-2

40
05-29-2014, 09:38 AM #3
Hood stack is staying just gotta cut it down and drill a hole in the hood now. But no cruise control. Truck never had it so no point in adding it in. Thanks for the compliment. Hopefully itll be running sooner than later
yota4life
05-29-2014, 09:38 AM #3

Hood stack is staying just gotta cut it down and drill a hole in the hood now. But no cruise control. Truck never had it so no point in adding it in. Thanks for the compliment. Hopefully itll be running sooner than later

Insane190d
GT2256V

170
05-29-2014, 09:41 AM #4
Very cool
Insane190d
05-29-2014, 09:41 AM #4

Very cool

yota4life
K26-2

40
05-29-2014, 09:42 AM #5
I also started building a gauge pod in the dash where the vents were. I dont have a heater anymore so decided to ditch the vents. And 3 gauges fit perfect there. 1 is oil pressure then the other 2 will be boost and egt when I get them
yota4life
05-29-2014, 09:42 AM #5

I also started building a gauge pod in the dash where the vents were. I dont have a heater anymore so decided to ditch the vents. And 3 gauges fit perfect there. 1 is oil pressure then the other 2 will be boost and egt when I get them

Insane190d
GT2256V

170
05-29-2014, 09:44 AM #6
What trans are u using? Any engine mods?
Insane190d
05-29-2014, 09:44 AM #6

What trans are u using? Any engine mods?

yota4life
K26-2

40
05-29-2014, 09:48 AM #7
Stock toyota 5 speed. No engine mods as of yet. Once I get it running and know for sure it runs properly I wanna add an intercooler maybe a bigger turbo would love for an upgrade pump but we'll see how it goes
yota4life
05-29-2014, 09:48 AM #7

Stock toyota 5 speed. No engine mods as of yet. Once I get it running and know for sure it runs properly I wanna add an intercooler maybe a bigger turbo would love for an upgrade pump but we'll see how it goes

Simpler=Better
PORTED HEAD

2,127
05-29-2014, 12:24 PM #8
Looks great Smile

Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
Simpler=Better
05-29-2014, 12:24 PM #8

Looks great Smile


Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?

yota4life
K26-2

40
05-29-2014, 01:55 PM #9
Thanks alot! Its coming along slowly but surely. Kinda was a snow ball effect. The 22re Started overheating so I was just gonna motor swap to the om617 then got talked into the bodydrop then talked myself into the new back half. Now its almost done in all the areas. I tend to get bored an start something else then go back to it later
yota4life
05-29-2014, 01:55 PM #9

Thanks alot! Its coming along slowly but surely. Kinda was a snow ball effect. The 22re Started overheating so I was just gonna motor swap to the om617 then got talked into the bodydrop then talked myself into the new back half. Now its almost done in all the areas. I tend to get bored an start something else then go back to it later

 
  • 0 Vote(s) - 0 Average
Users browsing this thread:
 4 Guest(s)
Users browsing this thread:
 4 Guest(s)