OM605 manual pump + oil cooler
OM605 manual pump + oil cooler
Good evening, this is my first post so hello everyone!
I'm building a W124 with a 605 at the moment and i've got a question about oil coolers. I'm using a KKK turbo from an E300 so i'm not going to be making huge power. Obviously the 605 comes with the oil/water cooler, but with the manual pump on this won't fit. I have a 606 n/a oil filter housing which does fit but this means I don't have an oil cooler.
What is the best way to get round this? So far i have 3 options;
(09-23-2016, 01:38 AM)Nev Its from Luke at DieselPumpUK. If I took the rear module off it and made a plate it would fit, but as it is it doesn't.
(09-23-2016, 01:38 AM)Nev Its from Luke at DieselPumpUK. If I took the rear module off it and made a plate it would fit, but as it is it doesn't.
(09-23-2016, 01:38 AM)Nev Its from Luke at DieselPumpUK. If I took the rear module off it and made a plate it would fit, but as it is it doesn't.
(09-23-2016, 01:38 AM)Nev Its from Luke at DieselPumpUK. If I took the rear module off it and made a plate it would fit, but as it is it doesn't.