(VIDEO) 0-60 300SD W116 5 speed HX35 OM617
(VIDEO) 0-60 300SD W116 5 speed HX35 OM617
1979 300sd 0-60 in around 9 seconds
HX35 turbo that everyone said categorical could not would not work! Works good for me!
Factory mw pump adjusted the right way.
M110 flywheel revs freely but vibrations are evident under certain conditions i will be going heavier.
5 speed 717 from w123.
Opinions and question are welcome!
300sd/5speed
10-29-2016, 04:33 PM #1https://youtu.be/o_tFXbE6JwU
1979 300sd 0-60 in around 9 seconds
HX35 turbo that everyone said categorical could not would not work! Works good for me!
Factory mw pump adjusted the right way.
M110 flywheel revs freely but vibrations are evident under certain conditions i will be going heavier.
5 speed 717 from w123.
Opinions and question are welcome!
1978 300D, 373,000km... OM617.912 with a Holset HX30W, 7.5mm IP, 711.113 5 speed (project car, 7 years off the road and counting ;/)
1977 250 270,000km (parts car)
1977 300D (ex 280) 500,000km
1981 240D 498,000
1975 HJ45 ???,000
2001 2.8TD Rodeo 4x2 - 456,000 - DD
That's pretty damn good for a stock element pump!
1978 300D, 373,000km... OM617.912 with a Holset HX30W, 7.5mm IP, 711.113 5 speed (project car, 7 years off the road and counting ;/)
1977 250 270,000km (parts car)
1977 300D (ex 280) 500,000km
1981 240D 498,000
1975 HJ45 ???,000
2001 2.8TD Rodeo 4x2 - 456,000 - DD
Thanks Man, auto to manual took 2.5 seconds off the 0-60 time, i hope the heavier flywheel doesn't impact performance too much, but a 7.5mm pump should fix and losses when i eventually get one, what flywheel do you use NZscott?
300sd/5speed
10-29-2016, 07:19 PM #3That's pretty damn good for a stock element pump!
Thanks Man, auto to manual took 2.5 seconds off the 0-60 time, i hope the heavier flywheel doesn't impact performance too much, but a 7.5mm pump should fix and losses when i eventually get one, what flywheel do you use NZscott?
1 Guest(s)
1 Guest(s)