STD Tuning Engine Setting up a superpump

Setting up a superpump

Setting up a superpump

 
  • 0 Vote(s) - 0 Average
 
RickyE
TA 0301

53
10-03-2015, 04:59 AM #1
Hello, i recently got my pump with dieselmekins 7.5mm elements fitted, however i cant get it to tun right, it wont tick over for me and when i do get it to tick over its hanging the revs.

When im holding revs on it its running smoothly.

Can anyone help me set it up. I have tried screwing the tickover up, but the screw is nearly through the nut and it still wont tick over

Sorry if that doesnt make any sense, hopefully someone understands

Cheers
RickyE
10-03-2015, 04:59 AM #1

Hello, i recently got my pump with dieselmekins 7.5mm elements fitted, however i cant get it to tun right, it wont tick over for me and when i do get it to tick over its hanging the revs.

When im holding revs on it its running smoothly.

Can anyone help me set it up. I have tried screwing the tickover up, but the screw is nearly through the nut and it still wont tick over

Sorry if that doesnt make any sense, hopefully someone understands

Cheers

minim
K26-2

41
10-03-2015, 05:58 AM #2
I'm not sure I understand, but did you connect the Alda to the pressure side of the intake? Does it move during boost?
minim
10-03-2015, 05:58 AM #2

I'm not sure I understand, but did you connect the Alda to the pressure side of the intake? Does it move during boost?

barrote
Superturbo

1,627
10-03-2015, 07:21 AM #3
take it out , sincronize it and it will be fine...

FD,
Powered by tractor fuel
barrote
10-03-2015, 07:21 AM #3

take it out , sincronize it and it will be fine...


FD,
Powered by tractor fuel

TurboTim
Holset

457
10-03-2015, 09:00 AM #4
What he said...

87 300SDL OM606 swapped HE351VE 722.633 swapped, Crower cams, KM valvesprings
76 300TD custom lots of stuff
06 Mercedes CL65 AMG 619 WHP, http://TurboTims.com
TurboTim
10-03-2015, 09:00 AM #4

What he said...


87 300SDL OM606 swapped HE351VE 722.633 swapped, Crower cams, KM valvesprings
76 300TD custom lots of stuff
06 Mercedes CL65 AMG 619 WHP, http://TurboTims.com

gary andrews
4x4 builder

48
10-03-2015, 12:59 PM #5
take it out check your not 180 out put back in 10-11 deg after, sounds like timings out

discovery 2 fitted om605 m pump 7.5 elements 300 turbo at mo
c250 std at mo
off road buggy fitting om 606 turbo ? supercharger ? to follow
www.gaz-fab.co.uk www.facebook.com/gazfab
gary andrews
10-03-2015, 12:59 PM #5

take it out check your not 180 out put back in 10-11 deg after, sounds like timings out


discovery 2 fitted om605 m pump 7.5 elements 300 turbo at mo
c250 std at mo
off road buggy fitting om 606 turbo ? supercharger ? to follow
www.gaz-fab.co.uk www.facebook.com/gazfab

RickyE
TA 0301

53
10-04-2015, 04:26 AM #6
No alda on it, its a na pump

Will try that, it runs fine on boost and have had it driving, but will try taking it off and timing it up again, cheers
RickyE
10-04-2015, 04:26 AM #6

No alda on it, its a na pump

Will try that, it runs fine on boost and have had it driving, but will try taking it off and timing it up again, cheers

 
  • 0 Vote(s) - 0 Average
Users browsing this thread:
 2 Guest(s)
Users browsing this thread:
 2 Guest(s)