STD Tuning Engine Using the arduino as a tach signal generator.

Using the arduino as a tach signal generator.

Using the arduino as a tach signal generator.

 
  • 0 Vote(s) - 0 Average
 
winmutt
bitbanger

3,468
09-17-2009, 09:36 AM #1
My Tach stopped working when I forgot to swap the adapter plates when I swapped engines. The tach signal from the front of the car is going to require additional electronics (amp the signal) so I am going to use the alternator as the signal source. One problem I see with this is preventing a failed regulator (voltage spikes) from frying the arduino. I am looking into ways to mitigate that.

1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
winmutt
09-17-2009, 09:36 AM #1

My Tach stopped working when I forgot to swap the adapter plates when I swapped engines. The tach signal from the front of the car is going to require additional electronics (amp the signal) so I am going to use the alternator as the signal source. One problem I see with this is preventing a failed regulator (voltage spikes) from frying the arduino. I am looking into ways to mitigate that.


1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42

ForcedInduction
Banned

3,628
09-17-2009, 10:57 AM #2
Add a stock tach amp. Its wiring is extremely simple and won't take much more than 30 minutes.

http://www.superturbodiesel.com/std/addi...-t-97.html
This post was last modified: 09-17-2009, 10:58 AM by ForcedInduction.
ForcedInduction
09-17-2009, 10:57 AM #2

Add a stock tach amp. Its wiring is extremely simple and won't take much more than 30 minutes.

http://www.superturbodiesel.com/std/addi...-t-97.html

winmutt
bitbanger

3,468
09-17-2009, 01:20 PM #3
My sensor on the front is shot as well and getting to that bolt isn't very easy. Also I am going to use the signal in conjunction with speedo and others for vane control.
This post was last modified: 09-17-2009, 01:21 PM by winmutt.

1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
winmutt
09-17-2009, 01:20 PM #3

My sensor on the front is shot as well and getting to that bolt isn't very easy. Also I am going to use the signal in conjunction with speedo and others for vane control.


1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42

DeliveryValve
Superturbo

1,338
09-17-2009, 11:59 PM #4
Maybe you can drill a hole somewhere in the intermediate plate for the RPM sensor. I don't think it would have to be in the same location, just it has to be able to "count" the teeth on the ring gear.

Should of, should of should of... When you changed out your flywheel, that would of been a good time to swap out the plate. I have one sitting around.
This post was last modified: 09-18-2009, 05:25 PM by DeliveryValve.

Gota love Mercedes Diesels!



.
DeliveryValve
09-17-2009, 11:59 PM #4

Maybe you can drill a hole somewhere in the intermediate plate for the RPM sensor. I don't think it would have to be in the same location, just it has to be able to "count" the teeth on the ring gear.

Should of, should of should of... When you changed out your flywheel, that would of been a good time to swap out the plate. I have one sitting around.


Gota love Mercedes Diesels!



.

winmutt
bitbanger

3,468
09-18-2009, 09:20 AM #5
I have real bad chatter in first and second at low power and driveline vibrations as well so I may be taking it off soon enough. Race car is down to the flywheel, I need to go back and get it off as well as the adapter.

1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
winmutt
09-18-2009, 09:20 AM #5

I have real bad chatter in first and second at low power and driveline vibrations as well so I may be taking it off soon enough. Race car is down to the flywheel, I need to go back and get it off as well as the adapter.


1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42

DeliveryValve
Superturbo

1,338
09-18-2009, 05:26 PM #6
(09-18-2009, 09:20 AM)winmutt I have real bad chatter in first and second at low power and driveline vibrations as well so I may be taking it off soon enough. Race car is down to the flywheel, I need to go back and get it off as well as the adapter.

What? With your new $700 flywheel? Yikes!

Gota love Mercedes Diesels!



.
DeliveryValve
09-18-2009, 05:26 PM #6

(09-18-2009, 09:20 AM)winmutt I have real bad chatter in first and second at low power and driveline vibrations as well so I may be taking it off soon enough. Race car is down to the flywheel, I need to go back and get it off as well as the adapter.

What? With your new $700 flywheel? Yikes!


Gota love Mercedes Diesels!



.

winmutt
bitbanger

3,468
09-18-2009, 09:25 PM #7
(09-18-2009, 05:26 PM)DeliveryValve
(09-18-2009, 09:20 AM)winmutt I have real bad chatter in first and second at low power and driveline vibrations as well so I may be taking it off soon enough. Race car is down to the flywheel, I need to go back and get it off as well as the adapter.

What? With your new $700 flywheel? Yikes!

Oh I was taking the 4spd off the lemons car, that the tach sensor is on the engine in it. As far as the chatter I am 99% sure its either a loose pressure plate or something in the trans. I think the driveline vibrations are from not matching up the hash marks (I dont remeber offhand doing it) or the 300D damper I have, which was already loose on one side, may have bit it.

1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42
winmutt
09-18-2009, 09:25 PM #7

(09-18-2009, 05:26 PM)DeliveryValve
(09-18-2009, 09:20 AM)winmutt I have real bad chatter in first and second at low power and driveline vibrations as well so I may be taking it off soon enough. Race car is down to the flywheel, I need to go back and get it off as well as the adapter.

What? With your new $700 flywheel? Yikes!

Oh I was taking the 4spd off the lemons car, that the tach sensor is on the engine in it. As far as the chatter I am 99% sure its either a loose pressure plate or something in the trans. I think the driveline vibrations are from not matching up the hash marks (I dont remeber offhand doing it) or the 300D damper I have, which was already loose on one side, may have bit it.


1987 300D Sturmmachine
1991 300D Nearly Perfect
1985 300D Weekend/Camping/Dog car
1974 L508D Motoroam Monarch "NightMare"
OBK #42

 
  • 0 Vote(s) - 0 Average
Users browsing this thread:
 2 Guest(s)
Users browsing this thread:
 2 Guest(s)