STD Tuning Engine How do you remove a 606 pump?

How do you remove a 606 pump?

How do you remove a 606 pump?

 
  • 0 Vote(s) - 0 Average
 
Bangaway
606 Turbo > Porsche Turbo

129
06-02-2013, 10:47 PM #1
I've never removed an injection pump, but I need to so I can get it modified. I found some instructions but I would like some imput from others if possible.

Instructions: http://www.w124-zone.com/downloads/MB%20...1-8410.pdf


1.) buy special tools--the basket or assempbly cage, and blocking bolt
2.)disconect groung battery line
3.)unbolt noise encapsulation (what is this)
4.)unscrew central securing bolt, left hand threaded
5.) turn crankshaft to 14 degrees plus .5 degrees...TDC...look at instructions--please explain in more detail-
6.) remove chanin tensioner--necessary?
7.) unbolt injection lines at pump
8.)detatch vacuum lines at pump
9.) unnplug plastic coupling microswitch
10.)remove cruise control
11.) ARA? unplug
12.)ELR? unplug
13.)overflow restriction, unscrew?
14.) fuel lines, remove
15.)10/2 and 10/3 bolts
16.) injection pump--counter hold injection timing device--what?
17.) forgot-- first remove intake maniflod

Do I have to remove the vacum pump? Is bolt 40/3 behind the vacuum pump?

What do you use fo the special notched wrench listed in the insturctions? What are the big things to be aware of?

Lots of questions, I know. Add what you can, if possible. I gotta get the pump out! Then back in! Thanks in advance.
This post was last modified: 06-02-2013, 10:49 PM by Bangaway.
Bangaway
06-02-2013, 10:47 PM #1

I've never removed an injection pump, but I need to so I can get it modified. I found some instructions but I would like some imput from others if possible.

Instructions: http://www.w124-zone.com/downloads/MB%20...1-8410.pdf


1.) buy special tools--the basket or assempbly cage, and blocking bolt
2.)disconect groung battery line
3.)unbolt noise encapsulation (what is this)
4.)unscrew central securing bolt, left hand threaded
5.) turn crankshaft to 14 degrees plus .5 degrees...TDC...look at instructions--please explain in more detail-
6.) remove chanin tensioner--necessary?
7.) unbolt injection lines at pump
8.)detatch vacuum lines at pump
9.) unnplug plastic coupling microswitch
10.)remove cruise control
11.) ARA? unplug
12.)ELR? unplug
13.)overflow restriction, unscrew?
14.) fuel lines, remove
15.)10/2 and 10/3 bolts
16.) injection pump--counter hold injection timing device--what?
17.) forgot-- first remove intake maniflod

Do I have to remove the vacum pump? Is bolt 40/3 behind the vacuum pump?

What do you use fo the special notched wrench listed in the insturctions? What are the big things to be aware of?

Lots of questions, I know. Add what you can, if possible. I gotta get the pump out! Then back in! Thanks in advance.

aaa
GT2256V

913
06-03-2013, 08:14 AM #2
Yes, you have to remove the vacuum pump to get to the lefthand threaded bolt. The injection pump locking tool is also very useful:
[Image: 363264d1300292010-ip-re-re-question-ip-locking-tool.jpg]
aaa
06-03-2013, 08:14 AM #2

Yes, you have to remove the vacuum pump to get to the lefthand threaded bolt. The injection pump locking tool is also very useful:
[Image: 363264d1300292010-ip-re-re-question-ip-locking-tool.jpg]

Bangaway
606 Turbo > Porsche Turbo

129
06-03-2013, 10:12 PM #3
What does the basket do? Do I "need" it? Or is there a way to go without it.
This post was last modified: 06-03-2013, 11:20 PM by Bangaway.
Bangaway
06-03-2013, 10:12 PM #3

What does the basket do? Do I "need" it? Or is there a way to go without it.

SWL300SDL
300SDL Super Turbo / Prius Killer

35
06-25-2013, 01:26 AM #4
(06-03-2013, 10:12 PM)Bangaway What does the basket do? Do I "need" it? Or is there a way to go without it.

The basket for the vacuum pump? I ditched mine on my 603 when my pump failed. Most new or rebuilt pumps say to ditch the basket. Not to sure if the 606 needs it but I doubt it does being they are so similar.

1987 Mercedes 300SDL Super Turbo Restore/Project
SWL300SDL
06-25-2013, 01:26 AM #4

(06-03-2013, 10:12 PM)Bangaway What does the basket do? Do I "need" it? Or is there a way to go without it.

The basket for the vacuum pump? I ditched mine on my 603 when my pump failed. Most new or rebuilt pumps say to ditch the basket. Not to sure if the 606 needs it but I doubt it does being they are so similar.


1987 Mercedes 300SDL Super Turbo Restore/Project

Druk
Holset

297
06-25-2013, 02:48 AM #5
(06-03-2013, 10:12 PM)Bangaway What does the basket do? Do I "need" it? Or is there a way to go without it.

The basket holds the timing pulley in place when the pump is removed. Without it the pulley drops into the timing case.
This post was last modified: 06-25-2013, 02:51 AM by Druk.
Druk
06-25-2013, 02:48 AM #5

(06-03-2013, 10:12 PM)Bangaway What does the basket do? Do I "need" it? Or is there a way to go without it.

The basket holds the timing pulley in place when the pump is removed. Without it the pulley drops into the timing case.

maxypriest
Holset

287
06-25-2013, 04:38 AM #6
(06-25-2013, 02:48 AM)Druk
(06-03-2013, 10:12 PM)Bangaway What does the basket do? Do I "need" it? Or is there a way to go without it.

The basket holds the timing pulley in place when the pump is removed. Without it the pulley drops into the timing case.

Where do I get one of these baskets? Merc dealer?
Are they expensive?!
Max

W124 om606 HX40 finished and it's a beauty 450bhp/456ft-lbs
maxypriest
06-25-2013, 04:38 AM #6

(06-25-2013, 02:48 AM)Druk
(06-03-2013, 10:12 PM)Bangaway What does the basket do? Do I "need" it? Or is there a way to go without it.

The basket holds the timing pulley in place when the pump is removed. Without it the pulley drops into the timing case.

Where do I get one of these baskets? Merc dealer?
Are they expensive?!
Max


W124 om606 HX40 finished and it's a beauty 450bhp/456ft-lbs

Druk
Holset

297
06-25-2013, 07:21 AM #7
(06-25-2013, 04:38 AM)maxypriest Where do I get one of these baskets? Merc dealer?
Are they expensive?!
Max

Read this thread...

http://www.superturbodiesel.com/std/thre...l#pid52368

I'll take measurements of mine if you feel you can fabricate one from 1mm steel. Not that complicated.
This post was last modified: 06-25-2013, 07:21 AM by Druk.
Druk
06-25-2013, 07:21 AM #7

(06-25-2013, 04:38 AM)maxypriest Where do I get one of these baskets? Merc dealer?
Are they expensive?!
Max

Read this thread...

http://www.superturbodiesel.com/std/thre...l#pid52368

I'll take measurements of mine if you feel you can fabricate one from 1mm steel. Not that complicated.

maxypriest
Holset

287
06-25-2013, 09:03 AM #8
Cripes! And the locking tool too!!!

W124 om606 HX40 finished and it's a beauty 450bhp/456ft-lbs
maxypriest
06-25-2013, 09:03 AM #8

Cripes! And the locking tool too!!!


W124 om606 HX40 finished and it's a beauty 450bhp/456ft-lbs

Simpler=Better
PORTED HEAD

2,127
06-25-2013, 11:52 AM #9
I haven't torn into a 606 by hand yet but I'm sure that there must be a way to rig it without using the special tool. Safety wire and coat hangers?

Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?
Simpler=Better
06-25-2013, 11:52 AM #9

I haven't torn into a 606 by hand yet but I'm sure that there must be a way to rig it without using the special tool. Safety wire and coat hangers?


Newbie-read this: Cheap Tricks
617.952-220k-Getting built up
larsalan I guess I need to look at this stupid ass drip shit. What you have to like mess with those elements on the pump? What a fucking hassle. then use some wire to hold the throttle open or some shit?

06-25-2013, 12:02 PM #10
I swapped Pumps on 606 and 603 without any Special Tool. Only for Timing i use the Mercedes Tool..
hansebanger77
06-25-2013, 12:02 PM #10

I swapped Pumps on 606 and 603 without any Special Tool. Only for Timing i use the Mercedes Tool..

boyt
K26-2

25
06-25-2013, 04:43 PM #11
Give me part numbers of tools. And I will see what I can do on price. I get them at cost price to merc dealers
boyt
06-25-2013, 04:43 PM #11

Give me part numbers of tools. And I will see what I can do on price. I get them at cost price to merc dealers

Bangaway
606 Turbo > Porsche Turbo

129
06-25-2013, 10:04 PM #12
I think this is the part number 601 589 05 14 00. In the U.S. dealer prices range from about 150 to 300. I got lucky and bought a used one from a nice guySmile I guess about two years ago the dealer price was 10 bucks then they went to 150! Thanks Mercedes.
Bangaway
06-25-2013, 10:04 PM #12

I think this is the part number 601 589 05 14 00. In the U.S. dealer prices range from about 150 to 300. I got lucky and bought a used one from a nice guySmile I guess about two years ago the dealer price was 10 bucks then they went to 150! Thanks Mercedes.

boyt
K26-2

25
06-26-2013, 01:27 AM #13
Cost price is 129 plus vat. What a rip off. Lucky I have two already. Plus the pump last cking tool. Plus the pump timimg lights
boyt
06-26-2013, 01:27 AM #13

Cost price is 129 plus vat. What a rip off. Lucky I have two already. Plus the pump last cking tool. Plus the pump timimg lights

 
  • 0 Vote(s) - 0 Average
Users browsing this thread:
 4 Guest(s)
Users browsing this thread:
 4 Guest(s)