STD Tuning Engine laser key

laser key

laser key

 
  • 1 Vote(s) - 5 Average
 
mantahead
Holset

600
03-24-2011, 04:03 PM #1
hi guys,
i have a problem, i removed ecm and removed 2 chips for remapping purposes. I had chip holders fitted and refitted original chips. This is so chips can be changed without soldering for remapping.
Now the glow plug light won't come on and it won't engage the starter.
Is this the symptoms of the key being out of sync with ecm????

laser key 1998 w202 c250 turbo diesel.
I was getting ready to remap with hx35 and 7.5mm elements but this is holding me back.


wayne
mantahead
03-24-2011, 04:03 PM #1

hi guys,
i have a problem, i removed ecm and removed 2 chips for remapping purposes. I had chip holders fitted and refitted original chips. This is so chips can be changed without soldering for remapping.
Now the glow plug light won't come on and it won't engage the starter.
Is this the symptoms of the key being out of sync with ecm????

laser key 1998 w202 c250 turbo diesel.
I was getting ready to remap with hx35 and 7.5mm elements but this is holding me back.


wayne

E300TSC
Turbo-Supercharged

321
03-24-2011, 08:44 PM #2
Does the column unlock when you insert the key?

1998 MB E300 - 194,000 miles. Current/future mods: 7.5mm pump elements, Holset HX40 Turbo feeding Eaton M90 supercharger through custom fabbed intake system. Aeroturbine muffler, scratch-built 4" stainless exhaust. EGR eliminated, ECM recalibrated, modified rack position feedback circuit. Porterfield RS brake pads, Bilstein sport shocks, VDO EGT, oil and boost gauges.

2000 Ford F250 - 150,000 miles. Current/future mods: DP Tuner 3 map chip, scratch-built high flow intake, high output IDM, open circuit fuel system, ball bearing turbo, South Bend full metal clutch, slotted and drilled rotors. Autometer Sport Comp EGT and boost gauges.
E300TSC
03-24-2011, 08:44 PM #2

Does the column unlock when you insert the key?


1998 MB E300 - 194,000 miles. Current/future mods: 7.5mm pump elements, Holset HX40 Turbo feeding Eaton M90 supercharger through custom fabbed intake system. Aeroturbine muffler, scratch-built 4" stainless exhaust. EGR eliminated, ECM recalibrated, modified rack position feedback circuit. Porterfield RS brake pads, Bilstein sport shocks, VDO EGT, oil and boost gauges.

2000 Ford F250 - 150,000 miles. Current/future mods: DP Tuner 3 map chip, scratch-built high flow intake, high output IDM, open circuit fuel system, ball bearing turbo, South Bend full metal clutch, slotted and drilled rotors. Autometer Sport Comp EGT and boost gauges.

mantahead
Holset

600
03-25-2011, 02:19 AM #3
(03-24-2011, 08:44 PM)E300TSC Does the column unlock when you insert the key?
yea the column unlocks and ignition lights come on. If i plug in my 1996 non laser key ecu glow plug lights come on but it won,t engage starter.

wayne
mantahead
03-25-2011, 02:19 AM #3

(03-24-2011, 08:44 PM)E300TSC Does the column unlock when you insert the key?
yea the column unlocks and ignition lights come on. If i plug in my 1996 non laser key ecu glow plug lights come on but it won,t engage starter.

wayne

HughF_UK
GT2256V

140
03-25-2011, 06:39 AM #4
Hi Wayne, did you get your elements swapped into your electronic pump?
HughF_UK
03-25-2011, 06:39 AM #4

Hi Wayne, did you get your elements swapped into your electronic pump?

mantahead
Holset

600
03-25-2011, 08:56 AM #5
(03-25-2011, 06:39 AM)HughF_UK Hi Wayne, did you get your elements swapped into your electronic pump?
hi hugh,
yea elements swapped over myself.

wayne

mantahead
03-25-2011, 08:56 AM #5

(03-25-2011, 06:39 AM)HughF_UK Hi Wayne, did you get your elements swapped into your electronic pump?
hi hugh,
yea elements swapped over myself.

wayne

mantahead
Holset

600
03-26-2011, 02:29 PM #6
(03-24-2011, 08:44 PM)E300TSC Does the column unlock when you insert the key?
hi,
how does my laser key work, does it kill the starter and glow plugs or is it linked to the ecm? Something must have happened my ecm when the chip holders were fitted. If i heat the plugs and turn the starter will it run? If i use my older 1996 non laser key ecm, will it work?

wayne
mantahead
03-26-2011, 02:29 PM #6

(03-24-2011, 08:44 PM)E300TSC Does the column unlock when you insert the key?
hi,
how does my laser key work, does it kill the starter and glow plugs or is it linked to the ecm? Something must have happened my ecm when the chip holders were fitted. If i heat the plugs and turn the starter will it run? If i use my older 1996 non laser key ecm, will it work?

wayne

mantahead
Holset

600
03-31-2011, 05:14 PM #7
hi,
does anyone know if another ecu can be used on my w202 c250 turbo diesel? I tried another one which seems to be immobilised. With this other ecu it won't put any diesel out of the fuel shut off valve (the black plastic valve on the side of the pump with 3 diesel pipes and 1 electric plug. Can i use the key and key transponder out of this other vehicle with its ecu and wire it in to my car?
Any help appreciated, also you can pm me if you don't want this info on a public forum. Thanks

wayne
mantahead
03-31-2011, 05:14 PM #7

hi,
does anyone know if another ecu can be used on my w202 c250 turbo diesel? I tried another one which seems to be immobilised. With this other ecu it won't put any diesel out of the fuel shut off valve (the black plastic valve on the side of the pump with 3 diesel pipes and 1 electric plug. Can i use the key and key transponder out of this other vehicle with its ecu and wire it in to my car?
Any help appreciated, also you can pm me if you don't want this info on a public forum. Thanks

wayne

 
  • 1 Vote(s) - 5 Average
Users browsing this thread:
 3 Guest(s)
Users browsing this thread:
 3 Guest(s)