STD Tuning Drivetrain Dose anyone have trans bell housing measurements for a 617

Dose anyone have trans bell housing measurements for a 617

Dose anyone have trans bell housing measurements for a 617

 
  • 0 Vote(s) - 0 Average
 
cannonballSDL
CONTROL_agent21

66
02-15-2011, 12:41 AM #1
im looking for raw measurements (+/- .04'') or a cad file for a adapter plate im building.

Im mating a r380 Land rover trans to a 617.

any help is greatly appreciated

[Image: img1231808006712-1.jpg][Image: img1231724701604-1-1.jpg][Image: img1231603208122.jpg]
cannonballSDL
02-15-2011, 12:41 AM #1

im looking for raw measurements (+/- .04'') or a cad file for a adapter plate im building.

Im mating a r380 Land rover trans to a 617.

any help is greatly appreciated


[Image: img1231808006712-1.jpg][Image: img1231724701604-1-1.jpg][Image: img1231603208122.jpg]

dieselboy
Rotatin 5500 times a minute

680
02-15-2011, 01:11 AM #2
As in depth? Or bolt pattern? I have a spare trans and a adapter plate that I can measur out for you.


-Jesse

80 300sd hy35, front mount intercooler, w115 intake, rack limiter removed, Alda removed, full load turned up, boost, ebp, trans, pyro, egr delete, 3.5" exhaust, e-fan, 16x8 rims with, 245/50 tires, lowered, bilstien 5100's, 12" front brakes, 2.65:1 diff.
97 f250 psd 4x4, crawler
70 f250 390
83 Volvo 242, lots of mods
66 Volvo amazon

10 mistsubishi fuso service truck.
dieselboy
02-15-2011, 01:11 AM #2

As in depth? Or bolt pattern? I have a spare trans and a adapter plate that I can measur out for you.


-Jesse

80 300sd hy35, front mount intercooler, w115 intake, rack limiter removed, Alda removed, full load turned up, boost, ebp, trans, pyro, egr delete, 3.5" exhaust, e-fan, 16x8 rims with, 245/50 tires, lowered, bilstien 5100's, 12" front brakes, 2.65:1 diff.
97 f250 psd 4x4, crawler
70 f250 390
83 Volvo 242, lots of mods
66 Volvo amazon

10 mistsubishi fuso service truck.

300D50
Graphite Moderator, ala RBMK

775
02-15-2011, 09:19 AM #3
What format do you want? I've got a CMM scan off of a 617, all holes, including the starter and locating lip.

1990 Power Ram 50 V6 SOHC 24V 6g72

I can be wrong, don't take everything I say as verbatim, please fact-check first.
My posts are my personal opinions and thoughts, unless otherwise noted.
300D50
02-15-2011, 09:19 AM #3

What format do you want? I've got a CMM scan off of a 617, all holes, including the starter and locating lip.


1990 Power Ram 50 V6 SOHC 24V 6g72

I can be wrong, don't take everything I say as verbatim, please fact-check first.
My posts are my personal opinions and thoughts, unless otherwise noted.

cannonballSDL
CONTROL_agent21

66
02-15-2011, 11:16 AM #4
(02-15-2011, 01:11 AM)dieselboy As in depth? Or bolt pattern? I have a spare trans and a adapter plate that I can measur out for you.
Yes pleaseSmile
(02-15-2011, 09:19 AM)300D50 What format do you want? I've got a CMM scan off of a 617, all holes, including the starter and locating lip.

my machine shop told me a TIFF file will be the best but anything you send well be workable. My email is Stefan@eurodesignmk.com


Huge thanks guys!


[Image: img1231808006712-1.jpg][Image: img1231724701604-1-1.jpg][Image: img1231603208122.jpg]
cannonballSDL
02-15-2011, 11:16 AM #4

(02-15-2011, 01:11 AM)dieselboy As in depth? Or bolt pattern? I have a spare trans and a adapter plate that I can measur out for you.
Yes pleaseSmile
(02-15-2011, 09:19 AM)300D50 What format do you want? I've got a CMM scan off of a 617, all holes, including the starter and locating lip.

my machine shop told me a TIFF file will be the best but anything you send well be workable. My email is Stefan@eurodesignmk.com


Huge thanks guys!


[Image: img1231808006712-1.jpg][Image: img1231724701604-1-1.jpg][Image: img1231603208122.jpg]

300D50
Graphite Moderator, ala RBMK

775
02-15-2011, 12:01 PM #5
I'll dig them out, they're in either DXF or STEP format, raw scans.

EDIT:

Just found them, I never probed the bell housing bolt pattern, just the engine pattern and starter location.

Would you still need those?
This post was last modified: 02-15-2011, 12:49 PM by 300D50.

1990 Power Ram 50 V6 SOHC 24V 6g72

I can be wrong, don't take everything I say as verbatim, please fact-check first.
My posts are my personal opinions and thoughts, unless otherwise noted.
300D50
02-15-2011, 12:01 PM #5

I'll dig them out, they're in either DXF or STEP format, raw scans.

EDIT:

Just found them, I never probed the bell housing bolt pattern, just the engine pattern and starter location.

Would you still need those?


1990 Power Ram 50 V6 SOHC 24V 6g72

I can be wrong, don't take everything I say as verbatim, please fact-check first.
My posts are my personal opinions and thoughts, unless otherwise noted.

cannonballSDL
CONTROL_agent21

66
02-15-2011, 02:35 PM #6
please!

How did you scan it? and if i gave the R380 bell housing to you could you scan that?
This post was last modified: 02-15-2011, 02:38 PM by cannonballSDL.

[Image: img1231808006712-1.jpg][Image: img1231724701604-1-1.jpg][Image: img1231603208122.jpg]
cannonballSDL
02-15-2011, 02:35 PM #6

please!

How did you scan it? and if i gave the R380 bell housing to you could you scan that?


[Image: img1231808006712-1.jpg][Image: img1231724701604-1-1.jpg][Image: img1231603208122.jpg]

300D50
Graphite Moderator, ala RBMK

775
02-15-2011, 02:36 PM #7
I'll throw them up on my site in a few, and drop the link in here.
EDIT:
Here you are.

I take no responsibility for any problems that might arise, but it should be good.

It's raw data, and will need to be processed before it's usable.
This post was last modified: 02-15-2011, 03:03 PM by 300D50.

1990 Power Ram 50 V6 SOHC 24V 6g72

I can be wrong, don't take everything I say as verbatim, please fact-check first.
My posts are my personal opinions and thoughts, unless otherwise noted.
300D50
02-15-2011, 02:36 PM #7

I'll throw them up on my site in a few, and drop the link in here.
EDIT:
Here you are.

I take no responsibility for any problems that might arise, but it should be good.

It's raw data, and will need to be processed before it's usable.


1990 Power Ram 50 V6 SOHC 24V 6g72

I can be wrong, don't take everything I say as verbatim, please fact-check first.
My posts are my personal opinions and thoughts, unless otherwise noted.

cannonballSDL
CONTROL_agent21

66
02-15-2011, 05:11 PM #8
Thanks man thats a great start!


[Image: img1231808006712-1.jpg][Image: img1231724701604-1-1.jpg][Image: img1231603208122.jpg]
cannonballSDL
02-15-2011, 05:11 PM #8

Thanks man thats a great start!


[Image: img1231808006712-1.jpg][Image: img1231724701604-1-1.jpg][Image: img1231603208122.jpg]

 
  • 0 Vote(s) - 0 Average
Users browsing this thread:
 2 Guest(s)
Users browsing this thread:
 2 Guest(s)