FAQ EDC Pumps / W202/W210 W463 ECU’s
FAQ EDC Pumps / W202/W210 W463 ECU’s
Quote:If there are problems to start the car, add ACC onto pin 13 of ECU
(take it from second leg of diode). Then, cut off pin 13 from the ECU plug.
I've gotten this work work very well on my OM606a. 80Kmiles of reliable driving. Then I went to make a backup ECU and tried to use the Julie "Universal Emulator" board instead. Following the instructions, it started and ran beautifully. Unfortunately, after about 5 starts, it no longer starts. The documentation for the module suggests:
Quote:If there are problems to start the car, add ACC onto pin 13 of ECU
(take it from second leg of diode). Then, cut off pin 13 from the ECU plug.