Toyota 80 Series Landcruiser OM606 Install and Twincharge
Toyota 80 Series Landcruiser OM606 Install and Twincharge
I too am putting an OM606 into my 80 series, it seems like this swap is gaining some traction in the cruiser community. I've been putting mine together for over a year now. I learned how to use AutoCAD to develop an adapter plate and flywheel. I'm using a 98 Dodge Dakota 5 speed bellhousing on an 98 Toyota R150f with an HZJ79 rear housing and an 89 fj62 split transfer case. I'm adding Marlin Crawler hardened thrust washer and billet bearing retainer to add some strength to the R150f and an AX15 input shaft. The transfer case, along with being rebuilt is being converted to manual shift instead of vacuum. The engine is getting all new accessories since it didn't come with any, an OM648 rear sump pan, oil pump and noise capsule. It has a DieselPumpsUK 7.5mm mechanical pump and I'm compounding the Stock K14 with HX35/40 billet hybrid with a 12cm wastegateless turbine housing. I will be using and an Air to Air intercooler for now. I will be starting the swap June 14,2017. Good luck on your swap, I look forward to seeing it.