![]() |
Won't shift from 1st - Printable Version +- STD (https://www.superturbodiesel.com/std) +-- Forum: Tuning (https://www.superturbodiesel.com/std/forumdisplay.php?fid=6) +--- Forum: Drivetrain (https://www.superturbodiesel.com/std/forumdisplay.php?fid=9) +--- Thread: Won't shift from 1st (/showthread.php?tid=8460) |
Won't shift from 1st - mickeyfn19 - 06-10-2021 Hi all. Currently in the process of finishing my 210. Got a hx35 slapped on there. Went to test it and it won't shift out of first. Even if I do it manually it won't get out of first. Tried winter mode too and nothing. Any help would be great Thanks Mike RE: Won't shift from 1st - nastala - 06-14-2021 (06-10-2021, 12:19 PM)mickeyfn19 Hi all. Currently in the process of finishing my 210. Got a hx35 slapped on there. Went to test it and it won't shift out of first. Even if I do it manually it won't get out of first. Tried winter mode too and nothing. Any help would be great Low fluid in my 722.3 prevents it from leaving 1st. RE: Won't shift from 1st - mickeyfn19 - 06-15-2021 I have a dip stick but I'm not sure if it's the right one. How would you know? Also the car has 1,2,3 and d. So 5 speed. That is 722.6 right? RE: Won't shift from 1st - dieseltorque - 06-15-2021 If 1,2,3 & D , then its 722.3 or 722.4 ,,,4 gear only,, RE: Won't shift from 1st - mickeyfn19 - 06-15-2021 Damn. Here I was thinking I knew some stuff haha. I thought d was 4th and 5th. I'm looking into the carsoft mb2 or cr. Can you recommend which is best? RE: Won't shift from 1st - dieseltorque - 06-15-2021 Both transmissions are same, but 722.4 is smaller and weaker,,,722.6 is 5speed and controlled by TCU RE: Won't shift from 1st - mickeyfn19 - 06-15-2021 I'm hoping my local garage can hook up their snap on machine and get a result. Not expecting it to work but would be nice if it did haha. So what kind of torque can a .6 handle. I was told it would manage a 400ish hp built? RE: Won't shift from 1st - mickeyfn19 - 06-22-2021 All sorted! Car now shifting through every gear. The gearbox was in limp mode due to error codes caused by a flat battery. The local lads diagnostic jobby worked great! |