STD
Who sells a good OM606 Manifold? - Printable Version

+- STD (https://www.superturbodiesel.com/std)
+-- Forum: Tuning (https://www.superturbodiesel.com/std/forumdisplay.php?fid=6)
+--- Forum: Engine (https://www.superturbodiesel.com/std/forumdisplay.php?fid=7)
+--- Thread: Who sells a good OM606 Manifold? (/showthread.php?tid=6240)



Who sells a good OM606 Manifold? - TurboTim - 02-15-2015

Who sells a good OM606 manifold? Just looking for something to hang my HE351VE from. 


RE: Who sells a good OM606 Manifold? - MFSuper90 - 02-15-2015

F-tune performance makes one heck of a nice looking product.


RE: Who sells a good OM606 Manifold? - F.R.A.S - 02-16-2015

(02-15-2015, 07:17 PM)MFSuper90 F-tune performance makes one heck of a nice looking product.

Thank you Smile

And yes we do. Either send me a message here or on the Facebook site .


RE: Who sells a good OM606 Manifold? - Mr_Robs - 02-16-2015

F-tune performance for sure!


RE: Who sells a good OM606 Manifold? - Eric78 - 02-18-2015

(02-16-2015, 01:48 AM)F.R.A.S
(02-15-2015, 07:17 PM)MFSuper90 F-tune performance makes one heck of a nice looking product.

Thank you Smile

And yes we do. Either send me a message here or on the Facebook site .

Do you make a manifold for the OM605 with an HX35?


RE: Who sells a good OM606 Manifold? - TurboTim - 02-18-2015

How does her merge the transition from head to pipe?


RE: Who sells a good OM606 Manifold? - raysorenson - 02-18-2015

You've seen the pics, I'm sure. Mostly the transition is in the flange, but I'm sure he'll make it however you want. You should talk to him. I'm sure he has an educated opinion on the cost/benefit ratio of moving the transition past the flange.


RE: Who sells a good OM606 Manifold? - F.R.A.S - 02-18-2015

We make exhaust and intake manifolds for almost anything. Just shoot me a message and we take it from there.

Regarding transition some people have expressed there concern about the narrow transition but we are now on the second generation flange and even the first generation (like on the w202 om604) works super well and there is really nice spool and response and we can't see any differences from a more elaborate build. However the om604 is a medium power build. The generation 2 flange has been hard tested to about 3.2bar of boost and is performing amazingly good.

So from a spool and maximum power angle you are as good with our billet flange as with some more worked transitions. However we can and have done it. The om605 we built and crashed before we even could reach maximum power have an awesome manifold that most people here have seen pictures of. If you search around a bit you'll find it.

We DO NOT build these things in a jig. We hand build every manifold out of YOUR specifications, your engine, your turbo, your chassis and your power goal.