+- STD (https://www.superturbodiesel.com/std)
+-- Forum: Tuning (https://www.superturbodiesel.com/std/forumdisplay.php?fid=6)
+--- Forum: Engine (https://www.superturbodiesel.com/std/forumdisplay.php?fid=7)
+--- Thread: Prechamber seal rings 617 turbo (/showthread.php?tid=3727)
Prechamber seal rings 617 turbo - MacDoe - 06-13-2012
Hello, We have had the cylinder head rebuilt and they resurfaced the head which was warped.007. They apparently took off .012. I am wondering if anyone might know the correct size of prechamber sealing ring we should order. I talked to engnatwork on P.P and he advised us to make sure and measure regardless of our findings, which is a good idea....but, I do have to special order them from the dealer here so I would like to have it figured out ahead of time what the best choice would be.
I read on here that .008= .2mm so then .012 should be .3mm. If the stock ring is 2.0mm then I should be looking at a 2.3mm sealing ring but maybe I should order the 2.4mm to be safe but I don't want to have it too far away. Thanks.
RE: Prechamber seal rings 617 turbo - Simpler=Better - 06-14-2012
You need to talk to Phil over at PeachParts-he will help you out on the phone and have the rings way cheaper than a dealer.