STD Tuning Engine kkk k26 installation tommorrow.

kkk k26 installation tommorrow.

kkk k26 installation tommorrow.

 View a Printable Version
 
  • 0 Vote(s) - 0 Average
 
W116Lorinser
Find
OM617.95

147
12-26-2009, 02:49 AM #1
Reply
Reply
i bought a nice kkk k26 recently. i have a 1980 300sd with the orginal t3 turbo and im gonna replace with the k26 tommorrow.

Is there anything i shuold be worried about... can i damge the engine or anything?

and what kind of difference can i expect with the k26?



thanks
W116Lorinser
12-26-2009, 02:49 AM #1

i bought a nice kkk k26 recently. i have a 1980 300sd with the orginal t3 turbo and im gonna replace with the k26 tommorrow.

Is there anything i shuold be worried about... can i damge the engine or anything?

and what kind of difference can i expect with the k26?



thanks

Reply
Reply
willbhere4u
Find
Six in a row make her go!

2,507
12-26-2009, 04:23 PM #2
Reply
Reply
Its a direct bolt on! but some of the nuts are difficult to reach with wrenches and sockets be ready to modify a 17mm wrench or reshape it to fit! it makes the same boost but dose it earlier for more off the line TQ I like it a lot more than the Garrett

this is a video of my 1980 300sd with the k26 and a cheap air filter http://www.youtube.com/watch?v=sqdexqX0bhM
This post was last modified: 12-26-2009, 04:23 PM by willbhere4u.
1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
willbhere4u
12-26-2009, 04:23 PM #2

Its a direct bolt on! but some of the nuts are difficult to reach with wrenches and sockets be ready to modify a 17mm wrench or reshape it to fit! it makes the same boost but dose it earlier for more off the line TQ I like it a lot more than the Garrett

this is a video of my 1980 300sd with the k26 and a cheap air filter http://www.youtube.com/watch?v=sqdexqX0bhM

1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running

Reply
Reply
Ian White
Find
machinemanjr

22
12-28-2009, 12:48 AM #3
Reply
Reply
(12-26-2009, 02:49 AM)W116Lorinser i bought a nice kkk k26 recently. i have a 1980 300sd with the orginal t3 turbo and im gonna replace with the k26 tommorrow.

Is there anything i shuold be worried about... can i damge the engine or anything?

and what kind of difference can i expect with the k26?



thanks

Your Welcome, haha

Ian
Ian White
12-28-2009, 12:48 AM #3

(12-26-2009, 02:49 AM)W116Lorinser i bought a nice kkk k26 recently. i have a 1980 300sd with the orginal t3 turbo and im gonna replace with the k26 tommorrow.

Is there anything i shuold be worried about... can i damge the engine or anything?

and what kind of difference can i expect with the k26?



thanks

Your Welcome, haha

Ian

Reply
Reply
 View a Printable Version
 
  • 0 Vote(s) - 0 Average
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)