New injetcor nozzles....
New injetcor nozzles....
Is there some types or brands of nozzles who is better than other, maybe a newer type bosch could fit an do a better job.
I believe I`ve heard about sonthing called "bozio" or something, is that correct, is that "good shit"?
No plans on high power, but I plan to adjust a little(1 bar boost and some more diesel).
Thanks
I`m planning to exchange my nozzles on my OM603A, I now have standard Bosch nozzles(264000 miles), three of them is good, and three sprays bad and leaking, the pressure was 144-145 bars at all six actually.
Is there some types or brands of nozzles who is better than other, maybe a newer type bosch could fit an do a better job.
I believe I`ve heard about sonthing called "bozio" or something, is that correct, is that "good shit"?
No plans on high power, but I plan to adjust a little(1 bar boost and some more diesel).
Thanks
Monark injector nozzles are made in germany and much better quality then bosch.
there $79.95 each
W116Lorinser
12-11-2009, 12:43 PM #2go to mercedessource.com
Monark injector nozzles are made in germany and much better quality then bosch.
there $79.95 each
GREASY_BEAST
12-11-2009, 06:17 PM #3Holy shit! Don't pay that much for them. I got mine for $20 each from a forum guy.
W123 Mods: 4 speed ** manual climate control ** '85 Kalitucky intake ** manual windows & full tint ** Euro headlights retrofit w/bixenon projectors ** 4 brake light mod ** Vogtland 50mm drop front & Lesjofors S600 drop rear springs ** 16" rims ** late w126 brake spindles, rotors & calipers ** full suspension rehab ** Bilstein HDs ** AL129X alternator & 1/0 starter and charging cables ** 300GD clutch/flywheel ** AFCO 80103N radiator & Earl's 41610 oil cooler ** custom block-off plate, remote oil filter & t-stat ** MW IP w/ tomnik's 6.5mm 'Holly' elements **
S124 Mods: 400E Rear subframe ** SL600 Brakes ** Late 300E 210mm diff ** SLK230 6 speed ** 17" CLK rims ** Vented RF Fender ** Facelift Hood, Headlights, and Lower Cladding **
OBK# 62
SurfRodder
12-11-2009, 11:28 PM #4yeah... even that shop has them in a 5 set kit w/ heat shields for $106
W123 Mods: 4 speed ** manual climate control ** '85 Kalitucky intake ** manual windows & full tint ** Euro headlights retrofit w/bixenon projectors ** 4 brake light mod ** Vogtland 50mm drop front & Lesjofors S600 drop rear springs ** 16" rims ** late w126 brake spindles, rotors & calipers ** full suspension rehab ** Bilstein HDs ** AL129X alternator & 1/0 starter and charging cables ** 300GD clutch/flywheel ** AFCO 80103N radiator & Earl's 41610 oil cooler ** custom block-off plate, remote oil filter & t-stat ** MW IP w/ tomnik's 6.5mm 'Holly' elements **
S124 Mods: 400E Rear subframe ** SL600 Brakes ** Late 300E 210mm diff ** SLK230 6 speed ** 17" CLK rims ** Vented RF Fender ** Facelift Hood, Headlights, and Lower Cladding **
OBK# 62
monark works well!!!! my cars run much smoother now!!!!
1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
willbhere4u
12-12-2009, 12:08 AM #5I got mine on ebay w heat shields 5 for $100 shipped
monark works well!!!! my cars run much smoother now!!!!
1987 300SDL 6spd manual om606.962 swap project
1985 300td euro 5spd wagon running
But I`m in Norway, and they only send to 48 lower states.
Maybe a buddy of mine could bring them, he goes to school there to be a pilot.
I found the german producent, but no nozzles for mercedes 603, do you have the part number from monark or the number on the nozzles?
No one on anything else than US ebay. Nothing else than mercedessource on google.
http://www.monark.de/englisch/index.htm
Thnx
I found them, 127,5 $ for six of them.
But I`m in Norway, and they only send to 48 lower states.
Maybe a buddy of mine could bring them, he goes to school there to be a pilot.
I found the german producent, but no nozzles for mercedes 603, do you have the part number from monark or the number on the nozzles?
No one on anything else than US ebay. Nothing else than mercedessource on google.
http://www.monark.de/englisch/index.htm
Thnx
I ran the PowerPlus 520 (?) in my TDI - got them from Kerma TDI. Great power and good smoke control...not like the .260mm shower nozzle race nozzles I got from Canada and had in another TDI.
On edit: Looks like mercedessource.com does not offer any Monark nozzles for the OM606. Darn.
Beers,
Matt
'07 W211 OM642
'95 W124.131/722.435, 211k - daily driver/Superturbo project - OM606.962 with "M" pump...under construction! (build thread here)
'99 W210.025 - gone, but not forgotten
'94 Dodge/Cummins - gone, but not forgotten
HoleshotHolset
12-28-2009, 12:56 PM #8Bosio makes good nozzles - I don't know of anyone but TDIs running them, even though they do make nozzles for other engines.
I ran the PowerPlus 520 (?) in my TDI - got them from Kerma TDI. Great power and good smoke control...not like the .260mm shower nozzle race nozzles I got from Canada and had in another TDI.
On edit: Looks like mercedessource.com does not offer any Monark nozzles for the OM606. Darn.
Beers,
Matt
'07 W211 OM642
'95 W124.131/722.435, 211k - daily driver/Superturbo project - OM606.962 with "M" pump...under construction! (build thread here)
'99 W210.025 - gone, but not forgotten
'94 Dodge/Cummins - gone, but not forgotten
1 Guest(s)
1 Guest(s)