STD Maintenance General fuel filter spin on replacement

fuel filter spin on replacement

fuel filter spin on replacement

 
  • 0 Vote(s) - 0 Average
 
George3soccer
Holset

373
11-18-2009, 03:31 PM #1
Hey guys this applies to my 87 om603 300d spin on fuel filter.

Once removed the old one and ready to install the new filter, what should be filled inside it. I forget this was a long time ago i did it.
George3soccer
11-18-2009, 03:31 PM #1

Hey guys this applies to my 87 om603 300d spin on fuel filter.

Once removed the old one and ready to install the new filter, what should be filled inside it. I forget this was a long time ago i did it.

ForcedInduction
Banned

3,628
11-18-2009, 04:24 PM #2
Clean diesel only (in a perfect world). Not from the old filter....

Put Diesel, Diesel Kleen, ATF or whatever other fluids you want into it. 99% of it will be recirculated to the tank within a few seconds.
This post was last modified: 11-18-2009, 05:55 PM by ForcedInduction.
ForcedInduction
11-18-2009, 04:24 PM #2

Clean diesel only (in a perfect world). Not from the old filter....

Put Diesel, Diesel Kleen, ATF or whatever other fluids you want into it. 99% of it will be recirculated to the tank within a few seconds.

George3soccer
Holset

373
11-18-2009, 05:46 PM #3
I just remembered i threw in ATF so thank ya, for the quick info. reply.
George3soccer
11-18-2009, 05:46 PM #3

I just remembered i threw in ATF so thank ya, for the quick info. reply.

GREASY_BEAST
Holset

411
11-24-2009, 06:52 PM #4
If you fill it with ATF the engine will run REALLY smooth and quiet for about 10 seconds... then back to normal.
GREASY_BEAST
11-24-2009, 06:52 PM #4

If you fill it with ATF the engine will run REALLY smooth and quiet for about 10 seconds... then back to normal.

 
  • 0 Vote(s) - 0 Average
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)