New Project - Skunkwerks EM9D
New Project - Skunkwerks EM9D
(09-12-2010, 06:49 PM)DeliveryValve R_D just a note, if your unhappy with 2-3 and the rest of the shifting is acceptable, then only change out the K1 springs. Very easy to do and can do it without removing valve body, located on driver's side front of valve body. If you use the whole kit, then the rest of the shifting characteristics will change. Possibly to an unacceptable manner.
Another note, K2 spring for firmer 3-4 is easy to get at also, located driver's side rear of the valve body. 1-2 will need to split the valve body.
(09-12-2010, 06:49 PM)DeliveryValve R_D just a note, if your unhappy with 2-3 and the rest of the shifting is acceptable, then only change out the K1 springs. Very easy to do and can do it without removing valve body, located on driver's side front of valve body. If you use the whole kit, then the rest of the shifting characteristics will change. Possibly to an unacceptable manner.
Another note, K2 spring for firmer 3-4 is easy to get at also, located driver's side rear of the valve body. 1-2 will need to split the valve body.