New Project - Skunkwerks EM9D
New Project - Skunkwerks EM9D
(08-11-2010, 08:14 PM)dropnosky Wow Congratulations, that is an achievement. We need video from inside, and also maybe a chase car.
How did you resolve the belt proximity to the driver side frame, did you bash that in?
Fixed a couple of issues...
I cleaned up the mating surfaces of the turbo water line and CHRA, there is a little ding on the CHRA threaded hole. I used a stone on it to get it smooth, but it is still there. I switched to aluminum washers and it sealed!
The noise I was hearing is actually the injectors, not the SC, there are really loud, I hope it will eventually go away as it runs.
I ordered a new coupling and will change it anyway.
Looks like I will be making a new bracket tomorrow out of steel and adding a few gussets on the back side.
I know the power steering pump is the same rotation as the old one, I bought it from Pick-a-Part so I don't know if it was good to begin with. I will do some more research and see what I come up with.
(08-11-2010, 08:14 PM)dropnosky Wow Congratulations, that is an achievement. We need video from inside, and also maybe a chase car.
How did you resolve the belt proximity to the driver side frame, did you bash that in?