New Project - Skunkwerks EM9D
New Project - Skunkwerks EM9D
(08-09-2010, 10:28 AM)HughF_UK Rudolf,
As I've been PM'ing Tom about, any information that your pump builder is willing to share with us here in the UK is would be very much appreciated. I have a local diesel shop who I have worked with for many years and they are keen to build me a 6 cylinder M pump for my 606 with some of Tom's elements, so any help is appreciated.
When are we going to get a video of it running
Hugh
Amazing work Rudolf
Good to see the Super M pump shining in the southern California sun!
The final setting of the high idle screw (max rpm) was exactly 1.5 turns CW. Until you get used to the power and response of the engine, I suggest returning the high idle to the bench verified, stock setting of exactly 1.5 revolutions CCW
Hugh, I will send you a PM.
(08-09-2010, 10:28 AM)HughF_UK Rudolf,
As I've been PM'ing Tom about, any information that your pump builder is willing to share with us here in the UK is would be very much appreciated. I have a local diesel shop who I have worked with for many years and they are keen to build me a 6 cylinder M pump for my 606 with some of Tom's elements, so any help is appreciated.
When are we going to get a video of it running
Hugh