New Project - Skunkwerks EM9D
New Project - Skunkwerks EM9D
Been busy at work, but I have done a few things that needed to be done. I drained the trans and changed the filter and bowden cable. I removed the drive shaft and replaced the support bearing and holder and I will replace the flex discs before it goes back in.
I also built a new reservoir tank for my A/W IC system. The new tank mounts where my air cleaner used to live on the passenger side behind the headlight. It holds 1.5 gallons and the whole system should be close to 3.5 when all is complete. I still need to make one more support then it gets painted - I polished it initially and it looked tits, but I just don't want the up keep. Eventually I may have my intake tubes coated, maybe a black chrome would look cool
Here is a pic of the tank: