Custom turbo
Custom turbo
12-06-2020, 02:11 PM
#22
I am going to have to modify the S200 turbine wheel to fit in the GT25V nozzle ring, and I will open up the turbine housing as much as I can to allow for a larger turbine Exducer diameter.
After looking at compressor maps and the actual specks of both the S200 and GT2556V turbos, I have decided that going with a 50mm S200 and putting the GT25V turbine housing on it would make a better turbo then putting the s200 compressor on the GT25V frame.
I am going to have to modify the S200 turbine wheel to fit in the GT25V nozzle ring, and I will open up the turbine housing as much as I can to allow for a larger turbine Exducer diameter.
Messages In This Thread
Custom turbo - by OM616 - 07-29-2020, 01:46 PM
RE: Custom turbo - by Austincarnut - 07-29-2020, 10:07 PM
RE: Custom turbo - by OM616 - 07-30-2020, 01:27 PM
RE: Custom turbo - by Austincarnut - 08-10-2020, 09:30 PM
RE: Custom turbo - by OM616 - 08-11-2020, 09:27 AM
RE: Custom turbo - by Austincarnut - 08-27-2020, 05:54 PM
RE: Custom turbo - by OM616 - 08-31-2020, 10:55 AM
RE: Custom turbo - by Austincarnut - 09-02-2020, 09:45 PM
RE: Custom turbo - by OM616 - 09-09-2020, 04:27 PM
RE: Custom turbo - by vica153 - 09-30-2020, 11:09 PM
RE: Custom turbo - by OM616 - 10-02-2020, 05:21 PM
RE: Custom turbo - by vica153 - 10-02-2020, 08:29 PM
RE: Custom turbo - by OM616 - 10-03-2020, 04:08 PM
RE: Custom turbo - by vica153 - 10-04-2020, 12:25 AM
RE: Custom turbo - by OM616 - 10-04-2020, 12:08 PM
RE: Custom turbo - by vica153 - 10-04-2020, 02:01 PM
RE: Custom turbo - by OM616 - 10-04-2020, 06:28 PM
RE: Custom turbo - by vica153 - 10-04-2020, 08:40 PM
RE: Custom turbo - by vica153 - 10-04-2020, 08:52 PM
RE: Custom turbo - by 50harleyrider - 10-11-2020, 09:11 PM
RE: Custom turbo - by vica153 - 10-11-2020, 11:39 PM
RE: Custom turbo - by OM616 - 12-06-2020, 02:11 PM
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Users browsing this thread:
1 Guest(s)
1 Guest(s)