OM606A Coolant(?) leaking into injector well?
OM606A Coolant(?) leaking into injector well?
06-19-2020, 03:11 AM
#2
Usually cracks develop from valve seat to the outside.
Anyway only way to find out is clean head and press test it.
But if u have a gasket burned... i wouldn't worry much.
That rust is quite common. Very often water goes in well and develop rust.
FD,
Powered by tractor fuel
Naa... well we haven't seen it all. Thousands of those were built so there might be failures in cast... otherwise cracks are not even common in 606 heads... as N/A and turbo are same cast.
Usually cracks develop from valve seat to the outside.
Anyway only way to find out is clean head and press test it.
But if u have a gasket burned... i wouldn't worry much.
That rust is quite common. Very often water goes in well and develop rust.
FD,
Powered by tractor fuel
Messages In This Thread
OM606A Coolant(?) leaking into injector well? - by AlanMcR - 06-18-2020, 06:36 PM
RE: OM606A Coolant(?) leaking into injector well? - by barrote - 06-19-2020, 03:11 AM
RE: OM606A Coolant(?) leaking into injector well? - by AlanMcR - 06-19-2020, 03:44 PM
RE: OM606A Coolant(?) leaking into injector well? - by Austincarnut - 06-19-2020, 06:29 PM
RE: OM606A Coolant(?) leaking into injector well? - by AlanMcR - 06-19-2020, 08:43 PM
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Users browsing this thread:
1 Guest(s)
1 Guest(s)