OM606 Turbo Selection for Truck application
OM606 Turbo Selection for Truck application
05-15-2020, 08:11 AM
#20
(05-15-2020, 07:33 AM)jav1 help me out here Brian... I'm always learning new things and sometimes I "think" I understand something and I really don't.
So... are you saying that in your "fuel request table", where the left most column is labelled "effthrottle %" and the top most row is labelled "enginespeed (RPM)", number in the table squares represents ul of fuel?? I didn't think so. I thought the values were duty cycle or % of full rack position?
fwiw...I didn't know this
meant "rolls eyes" so hopefully that last post didn't come across as snarky to the comment on the table, I think they were Baldurs estimate on ul of fuel. In reality you're right, the "ul" in the fuel table corresponds to a "rack position request table" which has a %duty cycle table (and a pid loop) to drive the solenoid to that rack position. So there are 2 tables that effectively adjust fueling and 3rd table that helps the rack know what duty cycle it should need to get to that rack position.
X Double Dot
05-15-2020, 08:11 AM #20(05-15-2020, 07:33 AM)jav1 help me out here Brian... I'm always learning new things and sometimes I "think" I understand something and I really don't.
So... are you saying that in your "fuel request table", where the left most column is labelled "effthrottle %" and the top most row is labelled "enginespeed (RPM)", number in the table squares represents ul of fuel?? I didn't think so. I thought the values were duty cycle or % of full rack position?
fwiw...I didn't know this
meant "rolls eyes" so hopefully that last post didn't come across as snarky to the comment on the table, I think they were Baldurs estimate on ul of fuel. In reality you're right, the "ul" in the fuel table corresponds to a "rack position request table" which has a %duty cycle table (and a pid loop) to drive the solenoid to that rack position. So there are 2 tables that effectively adjust fueling and 3rd table that helps the rack know what duty cycle it should need to get to that rack position.
Messages In This Thread
OM606 Turbo Selection for Truck application - by X Double Dot - 04-30-2020, 11:20 AM
RE: OM606 Turbo Selection for Truck application - by wiseman89 - 04-30-2020, 11:46 AM
RE: OM606 Turbo Selection for Truck application - by X Double Dot - 04-30-2020, 12:08 PM
RE: OM606 Turbo Selection for Truck application - by vica153 - 10-09-2020, 05:39 PM
RE: OM606 Turbo Selection for Truck application - by 50harleyrider - 04-30-2020, 06:54 PM
RE: OM606 Turbo Selection for Truck application - by X Double Dot - 05-01-2020, 06:58 AM
RE: OM606 Turbo Selection for Truck application - by X Double Dot - 05-01-2020, 08:34 AM
RE: OM606 Turbo Selection for Truck application - by 50harleyrider - 05-06-2020, 10:46 AM
RE: OM606 Turbo Selection for Truck application - by Motohead1 - 05-06-2020, 07:51 PM
RE: OM606 Turbo Selection for Truck application - by jav1 - 05-07-2020, 09:39 AM
RE: OM606 Turbo Selection for Truck application - by X Double Dot - 05-12-2020, 08:40 PM
RE: OM606 Turbo Selection for Truck application - by jav1 - 05-13-2020, 08:10 AM
RE: OM606 Turbo Selection for Truck application - by X Double Dot - 05-13-2020, 09:45 AM
RE: OM606 Turbo Selection for Truck application - by barrote - 05-13-2020, 01:15 AM
RE: OM606 Turbo Selection for Truck application - by jav1 - 05-13-2020, 10:43 AM
RE: OM606 Turbo Selection for Truck application - by X Double Dot - 05-13-2020, 12:21 PM
RE: OM606 Turbo Selection for Truck application - by jav1 - 05-14-2020, 08:01 AM
RE: OM606 Turbo Selection for Truck application - by X Double Dot - 05-14-2020, 10:21 PM
RE: OM606 Turbo Selection for Truck application - by jav1 - 05-15-2020, 07:33 AM
RE: OM606 Turbo Selection for Truck application - by X Double Dot - 05-15-2020, 08:11 AM
RE: OM606 Turbo Selection for Truck application - by 50harleyrider - 05-15-2020, 06:23 AM
RE: OM606 Turbo Selection for Truck application - by X Double Dot - 05-15-2020, 09:11 AM
RE: OM606 Turbo Selection for Truck application - by jav1 - 05-15-2020, 08:52 AM
RE: OM606 Turbo Selection for Truck application - by X Double Dot - 05-15-2020, 10:25 AM
RE: OM606 Turbo Selection for Truck application - by baldur - 05-17-2020, 08:29 AM
RE: OM606 Turbo Selection for Truck application - by jav1 - 05-15-2020, 10:41 AM
RE: OM606 Turbo Selection for Truck application - by 50harleyrider - 05-17-2020, 06:23 AM
RE: OM606 Turbo Selection for Truck application - by X Double Dot - 05-19-2020, 06:40 AM
RE: OM606 Turbo Selection for Truck application - by 50harleyrider - 05-19-2020, 01:29 PM
RE: OM606 Turbo Selection for Truck application - by zeeman - 05-19-2020, 05:44 PM
RE: OM606 Turbo Selection for Truck application - by X Double Dot - 05-21-2020, 08:57 PM
RE: OM606 Turbo Selection for Truck application - by X Double Dot - 10-09-2020, 09:00 AM
RE: OM606 Turbo Selection for Truck application - by AlanMcR - 10-09-2020, 12:49 PM
RE: OM606 Turbo Selection for Truck application - by TE27Levin - 10-09-2020, 02:06 PM
RE: OM606 Turbo Selection for Truck application - by vica153 - 10-09-2020, 04:29 PM
RE: OM606 Turbo Selection for Truck application - by 50harleyrider - 10-11-2020, 09:04 PM
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Users browsing this thread:
1 Guest(s)
1 Guest(s)