om606 conversion motor mounts
om606 conversion motor mounts
03-26-2020, 12:21 PM
#2
(03-25-2020, 07:17 PM)50harleyrider Need some input on motor mounts members have used. I am currently running 12v cummins 6bt mounts in my F150 conversion and they don't seem to dampen vibration enough. Any posts would be appreciated as right now I'm thinking oil filled mounts. The donor car mounts don't look very substantial but nevertheless they did support the engine in the w210 and I drove it before I pulled the engine and didn't notice anything bad vibration wise.
When I use the cummins 24 V, mounts I take the side rubber round disc part of the mount off so just the center of the mount were the bolt goes through is clamped in the steel mounts from the frame.
The problem with the stock mounts or fluid mounts they don't hold up well in 4x4 conditions. Sometimes it is a trade off for smoothness or strength.
Zeeman
(03-25-2020, 07:17 PM)50harleyrider Need some input on motor mounts members have used. I am currently running 12v cummins 6bt mounts in my F150 conversion and they don't seem to dampen vibration enough. Any posts would be appreciated as right now I'm thinking oil filled mounts. The donor car mounts don't look very substantial but nevertheless they did support the engine in the w210 and I drove it before I pulled the engine and didn't notice anything bad vibration wise.
When I use the cummins 24 V, mounts I take the side rubber round disc part of the mount off so just the center of the mount were the bolt goes through is clamped in the steel mounts from the frame.
The problem with the stock mounts or fluid mounts they don't hold up well in 4x4 conditions. Sometimes it is a trade off for smoothness or strength.
Zeeman
Messages In This Thread
om606 conversion motor mounts - by 50harleyrider - 03-25-2020, 07:17 PM
RE: om606 conversion motor mounts - by zeeman - 03-26-2020, 12:21 PM
RE: om606 conversion motor mounts - by barrote - 03-27-2020, 08:59 AM
RE: om606 conversion motor mounts - by 50harleyrider - 03-28-2020, 06:39 AM
RE: om606 conversion motor mounts - by AlanMcR - 03-28-2020, 09:39 PM
RE: om606 conversion motor mounts - by 50harleyrider - 05-26-2020, 05:19 AM
RE: om606 conversion motor mounts - by X Double Dot - 05-26-2020, 06:45 AM
RE: om606 conversion motor mounts - by zeeman - 05-26-2020, 11:31 AM
RE: om606 conversion motor mounts - by zeeman - 05-26-2020, 11:48 AM
RE: om606 conversion motor mounts - by 50harleyrider - 05-27-2020, 11:24 AM
RE: om606 conversion motor mounts - by zeeman - 05-28-2020, 01:26 PM
RE: om606 conversion motor mounts - by Nick S - 05-28-2020, 08:28 AM
RE: om606 conversion motor mounts - by X Double Dot - 05-28-2020, 02:47 PM
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Users browsing this thread:
2 Guest(s)
2 Guest(s)