STD Tuning Engine Head gasket options for high boost OM603

Head gasket options for high boost OM603

Head gasket options for high boost OM603

 View a Printable Version
 
  • 0 Vote(s) - 0 Average
 
Vict0r
Find
Naturally-aspirated

9
03-02-2020, 12:20 PM #13
Reply
Reply
I have to say first that yes AC is the proper way to tig weld aluminum,
but Ive been experimenting with DC and getting good results. An argon
purge is critical. These welds were made with a vantage 300 at about
120 amps using 3/32 4043 wire.




       
Vict0r
03-02-2020, 12:20 PM #13

I have to say first that yes AC is the proper way to tig weld aluminum,
but Ive been experimenting with DC and getting good results. An argon
purge is critical. These welds were made with a vantage 300 at about
120 amps using 3/32 4043 wire.




       

Reply
Reply
 View a Printable Version
 
  • 0 Vote(s) - 0 Average

Messages In This Thread
Head gasket options for high boost OM603 - by TwoMuchBoost - 02-23-2020, 05:26 PM
RE: Head gasket options for high boost OM603 - by TwoMuchBoost - 02-23-2020, 05:35 PM
RE: Head gasket options for high boost OM603 - by NZScott - 02-24-2020, 02:37 AM
RE: Head gasket options for high boost OM603 - by baldur - 02-24-2020, 06:10 AM
RE: Head gasket options for high boost OM603 - by TwoMuchBoost - 02-24-2020, 09:10 AM
RE: Head gasket options for high boost OM603 - by zeeman - 02-24-2020, 01:00 PM
RE: Head gasket options for high boost OM603 - by baldur - 02-24-2020, 02:23 PM
RE: Head gasket options for high boost OM603 - by Vict0r - 02-28-2020, 10:28 PM
RE: Head gasket options for high boost OM603 - by TwoMuchBoost - 02-29-2020, 06:09 PM
RE: Head gasket options for high boost OM603 - by TwoMuchBoost - 02-29-2020, 05:35 PM
RE: Head gasket options for high boost OM603 - by Vict0r - 03-01-2020, 11:31 PM
RE: Head gasket options for high boost OM603 - by baldur - 03-02-2020, 09:08 AM
RE: Head gasket options for high boost OM603 - by Vict0r - 03-02-2020, 12:20 PM
RE: Head gasket options for high boost OM603 - by baldur - 03-02-2020, 01:35 PM
RE: Head gasket options for high boost OM603 - by TwoMuchBoost - 03-02-2020, 01:51 PM
RE: Head gasket options for high boost OM603 - by Vict0r - 03-02-2020, 10:19 PM
RE: Head gasket options for high boost OM603 - by TwoMuchBoost - 03-03-2020, 12:20 PM
RE: Head gasket options for high boost OM603 - by AlanMcR - 03-03-2020, 11:53 PM
RE: Head gasket options for high boost OM603 - by TwoMuchBoost - 03-09-2020, 10:24 AM
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)