STD Tuning Engine Opinions on engine choice

Opinions on engine choice

Opinions on engine choice

 
  • 0 Vote(s) - 0 Average
 
miguelrocha
Naturally-aspirated

9
02-16-2020, 01:40 PM #1
Which engine would you choose for a Mercedes 190 for 450 / 500hp, OM605 or OM606?
miguelrocha
02-16-2020, 01:40 PM #1

Which engine would you choose for a Mercedes 190 for 450 / 500hp, OM605 or OM606?

zeeman
Holset

444
02-16-2020, 02:15 PM #2
(02-16-2020, 01:40 PM)miguelrocha Which engine would you choose for a Mercedes 190 for 450 / 500hp, OM605 or OM606?

Hands down, OM 606.
zeeman
02-16-2020, 02:15 PM #2

(02-16-2020, 01:40 PM)miguelrocha Which engine would you choose for a Mercedes 190 for 450 / 500hp, OM605 or OM606?

Hands down, OM 606.

benzguy
GT2256V

124
02-18-2020, 05:51 PM #3
I also go for the OM606
benzguy
02-18-2020, 05:51 PM #3

I also go for the OM606

50harleyrider
GTA2359VK

397
02-20-2020, 10:29 AM #4
You might consider an OM648 now that Baldur has the controller that will work on it and the 648 also has a far superior vgt turbo that will save you money although it won't make more than 300 hp. also consider some v6 diesels for ease of fitment. The 606 has been well researched for the 500 hp you're looking for of course. At any rate be prepared for some expensive manifolding, turbos and exhausts if you want big HP. I would advise contacting Baldur to get his expert advice.
This post was last modified: 02-20-2020, 10:34 AM by 50harleyrider.
50harleyrider
02-20-2020, 10:29 AM #4

You might consider an OM648 now that Baldur has the controller that will work on it and the 648 also has a far superior vgt turbo that will save you money although it won't make more than 300 hp. also consider some v6 diesels for ease of fitment. The 606 has been well researched for the 500 hp you're looking for of course. At any rate be prepared for some expensive manifolding, turbos and exhausts if you want big HP. I would advise contacting Baldur to get his expert advice.

 
  • 0 Vote(s) - 0 Average
Users browsing this thread:
 2 Guest(s)
Users browsing this thread:
 2 Guest(s)